Agilent Technologies AuroraPresto, User Manual

Page: 67 / 266

Setting up
Aurora Presto
Issue 7 - 05/02 3-19
-1-
Select
WAN Address
from the
IP Setup
screen to
display the
WAN Address
screen.
Origin
Use this to choose the origin between
a fixed IP Address (
Specify
) and a
network assigned IP Address (
IPCP
).
Adr
Use this to set up the Address that
Aurora Presto
will use on the WAN
(Wide Area Network).
DGW
Use this to enter the Default Gateway
IP Address.
Msk
Use to enter the WAN IP Mask. The IP
Mask separates the network address
from the host address.
DNS
Use this to set up the Domain Name
Server.
Note
Origin
must be set to
Specify
before you can enter a
Src
(Source IP Address).
Note
The above options consist of 4 groups of 3 digits divided by
a dot. The maximum number you can enter in each group
is 255.
Setting up the WAN IP Address Origin
The IPCP (Internet Protocol Control Protocol) is
responsible for configuring, enabling and disabling both
ends of the Point-to-Point link. It is used to enable an IP
address to be allocated to
Aurora Presto
from the network.
Use this to choose the origin between a fixed IP Address
(
Specify
) and a network assigned IP Address (
IPCP
).
481801-7.book Page 19 Thursday, May 23, 2002 10:46 AM