Agilent Technologies AuroraPresto, User Manual

Page: 47 / 266

Section 3 - Basic Operations
Issue 7 - 05/02 2-17
Adding or Deleting Characters
-1-
In the selection window, highlight each character you
require and press
ENTER to add it to the edit window
in the cursor’s current position. You can add a space
by pressing
F3
Space
.
Tips:
• To enter numbers, use the keypad.
• In the selection window, to ‘wrap’ the cursor
round to the first or last character, press
or
.
• You can add a new character at any point in the
string by switching to the edit window and
moving the cursor.
• In the edit window, to move quickly from the
last character to the first, press
+
(Home). To move from the first to the last
character, press
+ (End).
To delete a single character:
-1-
In the edit window, move the cursor under the
character and press
F1
Del
.
Tip
You can delete the last character in the string or the
character over the cursor without leaving the selection
window, by pressing
F1
Del
.
To delete the entire string:
-1-
Press F2
Clear
.
This works when either window is active.
Saving the String and Exiting
-1-
Press F4
OK
.
481801-7.book Page 17 Thursday, May 23, 2002 10:46 AM