Agilent Technologies 8163B Manual Download Page 357

Page: 357 / 466

Performance Test Instructions

Performance Tests

Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Sixth Edition

357

Testing the Number Keys

Using the cursor keys, move to the [P] parameter of the sensor channel, that is
channel 2. Press [Details].

Using the cursor keys, move to [Cal], and press Enter. Use the cursor key to
move the highlighted digit to the far left position.

Using the number keys press the following sequence: 1, 2, 3, 4, 5, and 6. 123.456
dB should be displayed as the [Cal] value.

Press Enter twice to get access to the [Cal] field again

Using the number keys press the following sequence: 1,0, ., 7, 8, and 9. 10.789
dB should be displayed as the [Cal] value.

Press [+/

−

] several times. The [Cal] field should toggle between 10.789 dB and

−

10.789 dB.

Press Preset, the green hardkey, to return to the Overview Screen.

The Modify Knob is only available if you use the Agilent 8164A/B.

N O T E

Summary of Contents for 8163B



















































































































































































































































































































































































































































































Search results

Summary of Contents for 8163B

Reviews:

Agilent Technologies 8163B, Manual, Page: 357 / 466

Search results

Summary of Contents for 8163B

Reviews: