manualshive.com logo in svg

Agilent Technologies 8163B, Manual, Page: 220 / 466

Share
Download
Agilent Technologies 8163B Manual Download Page 220

Switching Optical Routes

Agilent 8159xB Optical Switch modules

220

Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Sixth Edition

Agilent 8159xB Optical Switch 
modules

The Agilent 8159xB Optical Switch family includes 1x2 Switch modules, 
2x2 Switch modules, and 1x4 Switch modules. The switches are available 
in single-mode version (option 009) with angled 9/125 µm FC/APC 
connector interface or multimode version (option 062) with straight 
50/125 µm FC/PC connector interface.

The discontinued 81591A, 81591S, 81592A, 81592S, 81594A, 81594S, and 
81595A, 81595S are fully supported by the Agilent 816xA/B mainframes.

Options

Option 009:

Single-mode 9/125 µm, fixed FC/APC connector interfaces.

Option 062:

Multimode 50 (62.5)/125 µm, fixed FC/PC connector interfaces.

Figure 129 Agilent 81594B Optical Switch module ( 1x4, angled contact connectors)

Table 15 The Agilent 8159xB Optical Switch family

Module

Description

81591B

Optical Switch, 1x2

81594B

Optical Switch, 2x2 non-blocking (crossover)

81595B

Optical Switch, 1x4

Summary of Contents for 8163B



















































































































































































































































































































































































































































































Reviews:

No comments