Agilent Technologies 8163B Manual Download Page 281

Page: 281 / 466

The Return Loss Application

Applications

Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Sixth Edition

281

Configuration

The Return Loss Application can be configured according to your
measurement requirements. The following paramters can be configured:

• the tool used for reflection calibration (reference reflector or reference cable)

• the return loss reference value RLref of the reflector device

• the averaging time

• the wavelength of the return loss module.

User Interface

When the Return Loss Application is started the following screen appears
on the Agilent 8163A/B Lightwave Multimeter:

Figure 174 Main Screen of the Return Loss Application

The softkeys on the screen have the following functions:

Zero all

The Zero all softkey zeros all power measurement channels within the
mainframe (Return Loss and optional Power Meter) at the same time.

Summary of Contents for 8163B



















































































































































































































































































































































































































































































Search results

Summary of Contents for 8163B

Reviews:

Agilent Technologies 8163B, Manual, Page: 281 / 466

Search results

Summary of Contents for 8163B

Reviews: