Agilent Technologies 8163B Manual Download Page 278

Page: 278 / 466

Applications

The Pmax Curve

278

Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Sixth Edition

The Pmax Curve

What is the Pmax Curve ?

The Pmax Curve shows the maximum laser output power for your Tunable
Laser module across the wavelength range of your Tunable Laser module.

How to View the Pmax Curve

To view the Pmax Curve:

Press the Appl hardkey. The Applications menu, as shown in Figure 146 ,
appears.

Move to <Pmax curve> and press Enter. The Pmax Curve Screen, as shown in
Figure 173 , appears.

Figure 173 The Pmax Curve Screen

See “

Working with Application Graphs

” on page 231 for information on

zooming in and out.

Press [Close] to exit from the Pmax Curve application.

Summary of Contents for 8163B



















































































































































































































































































































































































































































































Search results

Summary of Contents for 8163B

Reviews:

Agilent Technologies 8163B, Manual, Page: 278 / 466

Search results

Summary of Contents for 8163B

Reviews: