Agilent Technologies 53220A, User Manual

Page: 255 / 294

53220A/53230A User’s Guide 255
Formats and Data Flow 7
Press the ‘
Select
’ soft key to select the directory or folder.
3
Enter the file name. The knob scrolls through A-Z (upper case), a-z (lower
case), numbers 0-9, selected keyboard characters, decimal point (.),
underscore (_), and space. Once the desired character is set, press the right
arrow (>) key under the knob to move to the next position.
4
Repeat until the file name is complete. Use the left arrow key (<) to
backspace and change a character. Changing the character to a space erases
the character.
5
Press ‘
STORE STATE
’ to store the state under the file name defined. A .sta
extension is added to the file name.
6 States (state files) are recalled by pressing the ‘
RECALL STATE
’ soft key,
highlighting the file name, and pressing ‘
Select
’. The state is recalled
immediately.
Storing User Preferences
Non-volatile I/O settings and user preferences can be stored and recalled using
the commands:
MMEMory:STORe:PREFerences <file>
MMEMory:LOAD:PREFerences <file>
<file>
is created during execution of the
STORe
command. The parameter
format is “[
drive:path]<file_name>
”.
drive
is either
INT
(internal flash
memory) or
USB
(external memory device).
path
is an absolute path and
folder name. If a folder is specified, it must have been previously created (see
MMEMory:MDIRectory
).
The combination of folder and file name cannot exceed 240 characters, and
cannot contain the characters \ / : * ? “ < > |. Preference files have a .prf exten-
sion.