Agilent Technologies 53220A, User Manual, Page: 40 / 294

40 53220A/53230A User’s Guide
2 53220A/53230A Software Installation and Interface Configuration
Figure 2-2. The Web UI SCPI Command Interface.
Any command in the counter’s SCPI command set can be sent to the instru-
ment. Query commands which include ‘?’ in the syntax return data and can be
sent by selecting
Send & Read
after the command is entered. Commands which
do not return data are sent using
Send Command
.
N O T E
Web interface pages other than the ‘Welcome Page’ may be password protected. When
shipped from the factory no password is set; however, an ‘Enter Password’ dialog box may
appear. Click on the dialog box to continue.
If the page is password protected and the password is unknown, pressing [
Utility
],
(
I/O Config
), (
LAN Reset
) on the front panel clears the password.