General
Assembly instructions EN
GE-25-P
Date 02.11.2021
Version 1.0
7–48
1.4 Applicable documents
In addition to the assembly instructions, the following documents must be
observed:
General terms and conditions
Catalogue data sheet of the GE-25-P
Instructions for integrated components (
supplier documentation)
This documentation can be downloaded from www.afag.ch.
Each GE-25-P is accompanied by a safety information sheet. This information
sheet must be read carefully by every person who carries out work on and
with the GE-25-P.
1.5 Warranty
The warranty terms for Afag handling components and handling systems are
the following:
24 months from initial operation and up to a maximum of 27 months from
delivery.
Parts in contact with the workpiece and wear parts are excluded from the
warranty.
The warranty covers the replacement or repair of defective Afag parts. Further
claims are excluded.
Note: However, a customer has a right to a defect-free product. This does also
apply to defective accessories and wear parts. Normal wear and tear is excluded
from the warranty.
The warranty shall expire in the following cases:
Improper use of the module
Non-observance of the instructions regarding assembly, commissioning,
operation and maintenance as well as ambient and operating conditions.
Improper assembly, commissioning, operation and maintenance.
Repairs and design changes carried out without prior technical instructions
of Afag Automation AG.
Removing the serial number from the product.
Inadequate checking of wear parts.
Non-observance of the EC Machinery Directive, the Accident Prevention
Regulations, the Standards of the German Electrotechnology Association
(VDE) and these safety and assembly instructions.
1.6 Liability
No changes shall be made to the module unless described in this instructions
manual or approved in writing by Afag Automation AG.
Afag Automation AG accepts no liability for unauthorized changes or improper
assembly, installation, commissioning, operation, maintenance or repair work.
