Installation, assembly & setting
Assembly instructions EN
GE-25-P
Date 02.11.2021
Version 1.0
27–48
6 Installation, assembly & setting
This chapter contains specific safety instructions and information regarding
proper installation, assembly and setting of the GE-25-P including their
connection to the control unit and the electric system.
6.1 Safety instructions for installation, assembly and adjustment
WARNING
Danger due to stored energy!
Incorrect ambient and operating conditions can cause hazards from the GE-
25-P that can lead to serious injuries and considerable damage to property or
reduce the service life of the module.
Design the gripper finger in such a way that the product reaches either the
"Open" or "Closed" position in the energy-free state.
Only change the gripper fingers if no residual energy can be released.
Ensure that the GE-25-P and the gripper fingers are sufficiently
dimensioned according to the application.
CAUTION
Risk of injury when connecting to mechanics and electrics!
When connecting the GE-25-P to the mechanics and electrics, unexpected
movements can occur when the power supply is still switched on or due to
existing residual energies, which can cause personal injury or damage to
property.
The connecting work may only be carried out by qualified personnel!
Before starting any work on the GE-25-P, switch off the power
supply/control unit and use a lockout device to make sure that it cannot be
switched on again.
Ensure that there is no residual energy left in the system.
Carefully read the assembly and safety instructions before working with or
on the GE-25-P.
CAUTION
Danger of crushing or shearing between the gripper fingers and the
system!
The gripper fingers are electrically operated. Restricted freedom of movement
between the gripper fingers and the machine components can cause crushing
or shearing injury.
Observe the instructions manual of the machine on which the GE-25-P is
mounted.
Maintenance and care work may only be carried out by qualified personnel.
The operating company shall make sure that the machine is operated in a
safe manner.
