Maintenance and Repair
Assembly instructions EN
GE-25-P
Date 02.11.2021
Version 1.0
39–48
9 Maintenance and Repair
9.1 General notes
The electric grippers are almost maintenance-free. Nevertheless, some
maintenance work must be carried out to ensure an optimum operating
condition of the electric grippers. This chapter describes the required
maintenance activities.
Each electric gripper is accompanied by a safety information sheet. This
information sheet must be read carefully by every person who carries out
work on and with the electric gripper.
9.2 Safety instructions for Maintenance and Repair
Also observe the safety instructions in
chap. 2 „Safety instructions“ in this
manual.
WARNING
Danger of injury due to improper maintenance!
Improperly carried out maintenance activities can cause considerable
damage to property and serious injury.
The operator must exercise due care and only use trained maintenance
personnel to carry out the activities.
Always wear personal protective equipment when carrying out maintenance
and repair work!
WARNING
Risk of injury due to uncontrolled movements of the electric gripper!
Signals from the control system can trigger unintentional movements of the
modules, which can cause injury.
Before starting any work on the electric gripper, switch off the control unit
and secure to prevent it from being switched on.
Observe the operating instructions of the controller used!
Before starting any activities, switch off the media supply and secure it from
being switched on again!
Set safety devices out of function.
