Safety instructions
Assembly instructions EN
GE-25-P
Date 02.11.2021
Version 1.0
13–48
WARNING
Risk of injury from sharp edges and pointed corners!
Sharp edges and pointed corners can cause cuts.
Wear personal protective equipment.
WARNING
Danger of injury from hot surfaces!
Surfaces of components can heat up strongly during operation. Skin contact
with hot surfaces will cause severe burns to the skin.
Wear protective gloves when working near hot surfaces.
Ensure that all surfaces have cooled down before carrying out any work.
CAUTION
Danger of injury in the working area of the modules!
Due to the decentralised control system, the operator must not necessarily
stand next to the grippers during operation so that he may not have a com-
plete view of the working area. Persons in the working area may be injured.
During operation ensure a good overview of the entire working area.
Unauthorized persons must not stay within the working area during
operation.
Observe safety distances.
CAUTION
Risk of injuries due to uncontrolled parts movements!
Incorrect control of connected drives, operating errors, incorrect
parameterisation during commissioning or software errors can trigger
unexpected movements that can cause personal injury or damage to
property.
Only qualified personnel may work with or on the GE-25-P.
Read the instructions carefully before working on or with the GE-25-P.
CAUTION
Risk of noise-induced hearing loss!
When the modules are installed in a machine or plant, the permissible noise
level may be exceeded depending on the various components, the
environment and the resonance.
The operating company is responsible for ensuring that the permissible
noise levels are observed.
If the noise level exceeds 85 dB(A) in normal operation, the operator must
wear hearing protectors at the workplace.
