Commissioning
36 – 48
Assembly instructions EN
GE-25-P
Date 02.11.2021
Version 1.0
Also observe the safety instructions in
chap. 2 „Safety instructions“ in this
manual.
7.2 Commissioning of the modules
Proceed carefully and follow the instructions step by step when commissioning
the modules for the first time:
1. Observe the permissible technical values (
Chapter 3).
- Payload
- Movement frequency
- Momentary load
2. First, make sure that there are no persons or tools in the working area.
3. Then, perform a test run
- Start with slow movements
- Then continue under normal operating conditions
Commissioning is completed.
CAUTION
Danger of injury in the working area of the modules!
Due to the decentralised control system, the operator of the grippers must not
necessarily stand next to the grippers during operation so that he may not
have a complete view of the working area. Persons in the working area may
be injured.
When operating the modules, ensure a good overview of the entire working
area.
Unauthorized persons must not stay within the working area during
operation.
CAUTION
Risk of injury to third parties during commissioning!
There is a risk of injury to third parties during commissioning of the electric
gripper GE-25-P.
Before commissioning the GE-25-P, secure the danger zone with a suitable
protective measure.
