AEQ
CAPITOL
Ultra-compact digital audio mixer
81
For
TH02
hybrid, the available configuration options are:
•
“
Ring
”
:
allows you to select the GPI where the incoming call signal provided by the
hybrid is wired. The key starts to blink when there is an incoming call. This function can
be combined in the same key with any of the following three functions.
NOTE:
the working mode of the selected
GPI
must be previously configured as “
TH02
”
(see section 4.2.1.1 of this manual).
•
“
Extended
”
:
enables the option of frequency extender for the TH02 telephone hybrid
and select the GPO used to send the remote control signal to the hybrid. The key turns
on when activated.
•
“
Wait GPO
”
:
selects and configures the physical GPO output associated to “WAIT”
function. The key turns on when activated and puts the call on hold (WAIT mode).
•
“
On Air GPO
”
:
selects and configures the physical GPO output associated to “ON AIR”
function. The key turns on when activated and puts the call on the air (ON AIR mode).
•
“
Line
”
:
for dual line hybrids such as TH02, this identifies the integrated line 1 and line 2,
to assign the different GPIs and GPOs for remote control
•
“
OK
”
:
allows you to accept the created or edited configuration.
•
“
Cancel
”
:
allows you to reject the created or edited configuration. No change you may
have made is saved.
IMPORTANT NOTE:
“Extended”, “Wait GPO” and “OnAir GPO” functions are exclusive
between them (a programmable key can have only one of the three options associated),
although any of them can be combined in the same key with “Ring” function.
For
Eagle
audio-codec, the available configuration options are:
•
“
Ring
”
:
allows you to select the GPI where the incoming call signal provided by the
codec is wired. The key starts to blink when there is an incoming call. This function can
be combined in the same key with any of the following four functions.
•
“
Wait GPI
”
:
selects and configures the physical GPI input associated to “WAIT”
function. The key turns on when WAIT mode (call on hold) is activated manually in the
audio-codec.
•
“
Wait GPO
”
:
selects and configures the physical GPO output associated to “WAIT”
function. The key turns on when activated and puts the call on hold (WAIT mode).
