AEQ
CAPITOL
Ultra-compact digital audio mixer
67
4.2.3.
“
I/O Configuration
“
submenu.
“I/O Configuration” submenu is accessed, from the drop-down menu “Hardware Configuration”,
by clicking on the icon:
This submenu allows you to configure the logical audio channels from the physical audio inputs
and outputs and as previously defined in the “Board Configuration” submenu.
There are two distinct parts in this submenu; upper part of the screen is dedicated to the input
channels configuration and the lower part of the screen is for the output channels configuration.
In both parts of the screen the tables have the following fields:
•
“
Id
”
:
indicates the equipment internal position of the signal.
•
“
Label
”
:
alphanumeric name of the channel. Maximum number of characters
recommended is 6. This is the name that appears in all displays and menus of the AEQ
CAPITOL control surface.
•
“
Model
”
:
type of the physical inputs/outputs present in the rear panel of the unit. This
field will be populated automatically once the “Board Configuration” has been
accomplished (see section 4.2.1 of this manual).
•
“
Config
”
:
access to advanced settings menu for the selected logical channel. To
acces, click on “
Click to [CONFIG]
” and then clicking again on the “
CONFIG
” button
that will appear.
Allows you to scroll to the top of the list.
Allows you to move to the position immediately above in the list.
Allows you to move to the position immediately below in the list.
Allows you to scroll to the last position of the list.
Allows you to insert a new entry in the list.
Allows you to delete the selected entry from the list. Confirmation is requested.
Allows you to
edit the selected entry.
Allows you to
accept changes to the selected entry.
Allows you to reject to the selected entry.
Allows you to refresh the information shown in the list.
