AEQ
CAPITOL
Ultra-compact digital audio mixer
10
There is the option of setting one of the programmable keys on the Control and Monitoring
section (C&M) as a general “CUE RESET” that disconnects all active signals from the CUE bus.
CUE signal associated controls
CUE volume is controlled by means of an encoder in the Control and Monitoring zone. A
dedicated stereo output for a set of external active speakers is provided in the “CUE” connector
(a 1/8” or 3,5mm stereo minijack), at the back of the AEQ CAPITOL audio core. It is compatible
with most PC speakers.
2.1.1.5. Active processes indicator.
Under the “CUE” button there is a blue LED with a “PROCESS” label. When lit, this indicates
the activation or change of any of the following fields: EQ, filters, dynamics (compressors and
limiters), balance or gain.
These four processes (EQ, dynamics, balance and gain) are controlled from the internal menu
associated with the “SELECT” button on the main screen of the Control and Monitoring section.
2.1.1.6. Channel activation key.
The channel activation key, also known as “CHANNEL ON/OFF” key is placed under the active
processes indicator. This key enables or disables audio to pass from the channel input to the
previously defined outputs.
This key can also be remotely activated by means of GPI. In order to configure remote
activation, please refere to chapter 4.2.3.1 of this manual.
CUE SELECTION
CUE RESET CUE VOLUME
CUE SENDING TO
CRM AND CRHP (control
monitors and headphones)
CUE SENDING TO
SRM AND SRHP (studio
monitors and headphones)
