background image

 

AEQ

 

CAPITOL

 

Ultra-compact digital audio mixer 

 

 

 

103

5. A.E.Q. GUARANTEE. 

 
AEQ warrants that this product has been designed and manufactured under a certified Quality 
Assurance System. AEQ therefore warrants that the necessary test protocols to assure the 
proper operation and the specified technical characteristics of the product have been followed 
and accomplished. 
 
This includes that the general protocols for design and production and the particular ones for 
this product are conveniently documented. 
 
1.- The present guarantee does not exclude or limit in any way any legally recognized right of 
the client. 
 
2.- The period of guarantee is defined to be twelve natural months starting from the date of 
purchase of the product by the first client. 
 
To be able to apply to the established in this guarantee, it is compulsory condition to inform the 
authorized distributor or –to its effect- an AEQ Sales office or the Technical Service of AEQ 
within thirty days of the appearance of the defect and within the period of guarantee, as well as 
to facilitate a copy of the purchase invoice and serial number of the product. 
 
It will be equally necessary the previous and expressed conformity from the AEQ Technical 
Service for the shipment to AEQ of products for their repair or substitution in application of the 
present guarantee. 
 
In consequence, return of equipment that does not comply with these conditions will not be 
accepted.   
 
3.- AEQ will at its own cost repair the faulty product once returned, including the necessary 
labour to carry out such repair, whenever the failure is caused by defects of the materials, 
design or workmanship. The repair will be carried out in any of the AEQ authorized Technical 
Service Centre. This guarantee does not include the freight charges of the product to or from 
such Authorized Technical Service Centre. 
 
4.- No Extension of the Guarantee Period for repaired product shall be applied. Nor shall a 
Substituted Products in application of this Guarantee be subject to Guarantee Period 
Extension. 
 
5.- The present guarantee will not be applicable in the following situations: 
improper use or Contrary use of the product as per the User or Instruction Manual; violent 
manipulation; exhibition to humidity or extreme thermal or environmental conditions or sudden 
changes of such conditions; electrical discharges or lightning; oxidation; modifications or not 
authorized connections; repairs or non-authorized disassembly of the product; spill of liquids or 
chemical products. 
 
6.- Under no circumstances, whether based upon this Limited Guarantee or otherwise, shall 
AEQ, S.A. be liable for incidental, special, or consequential damages derived from the use or 
from the impossibility of using the product. 
 
AEQ shall not be liable for loss of information in the disks or data support that have been 
altered or found to be inexact, neither for any accidental damage caused by the user or other 
persons manipulating the product. 

Summary of Contents for CAPITOL









































































































Reviews: