AEQ
CAPITOL
Ultra-compact digital audio mixer
41
•
“
BACK
”
:
pressing this key allows you to return to the previous menu screen.
•
“
INFO
”
:
essentially a maintenance menu displaying information about the IP address of
the “LAN” network port present in the rear panel of the unit and firmware versions
installed in the several console operating modules, as well as the routing and process
DSPs percentage of use.
•
“
SETUP
”
:
which displays and allows you to change the IP configuration associated with
the Ethernet port available on the rear panel of the equipment (“LAN”: see section
2.2.2.2 of this manual) in the form of IP address, subnet mask (MASK) and gateway
(GWAY). Only level 3 users can modify these parameters (the “SETUP” key is shown to
other users but is not active).
•
“
SELECT
”
:
advanced configuration of audio inputs/outputs, internal routing and
processes.
3.4.1.
“
INFO
“
menu.
This is a menu specifically for technical maintenance. The “INFO” menu lets you display the IP
configuration associated with the Ethernet port available on the rear panel of the equipment
(“LAN”: IP address, subnet mask and gateway are shown), the firmware versions installed in the
several console operating modules and the routing and process DSPs percentage of use.
The three options visible on the last line of the display are associated with three of the four
contextual keys below, from left to right:
•
“
BACK
”
:
pressing this key allows you to return to the previous menu screen.
•
“
FIRMW
”
:
in successive screens, which are accessed by turning any of the associated
encoders, you can display the firmware versions installed in the different modules that
make up the console: the 4 modules that make up the main board of the console (CPU,
FPGA, Routing DSP and Process DPS) are shown as “MAIN BOARD” and the MSC
module is shown as “CONTROL SURFACE”.
Each line is identified by the specific module and its reference, as well as the version
and the date of the currently installed specific firmware.
