AEQ CAPITOL User Manual Download Page 73

Page: 73 / 104

AEQ

CAPITOL

Ultra-compact digital audio mixer

4.2.5.

“

NTP Client

Configuration

“

submenu.

“NTP Client Configuration” submenu is accessed, from the drop-down menu “Hardware
Configuration”, by clicking on the icon:

“NTP Client Configuration” submenu allows you to enable synchronization of the date and time
of the system using standard Ethernet NTP protocol, with the local AEQ CAPITOL clock slaved
to the remote (NTP) signal.

The on-screen options are:

•

“

Active

”

allows you to activate or not this option. By default, it’s deactivated.

•

“

NTP/SNTP Server (IP)

”

IP address of the server with the remote master clock.

•

“

Update Every (min)

”

refresh period, the frequency with which AEQ CAPITOL will

contact the remote NTP time server to confirm that there are no deviations. The default
value is set to 10 minutes.

•

“

Time Zone Offset

”

allows you to compensate for the difference in time zone(s)

between the location of the console and the time zone where the remote NTP clock is
located.

Summary of Contents for CAPITOL









































































































Search results

Summary of Contents for CAPITOL

Reviews:

Related manuals for CAPITOL

Brands by name

Popular brands

AEQ CAPITOL, User Manual

Search results

Summary of Contents for CAPITOL

Reviews:

Related manuals for CAPITOL

Brands by name

Popular brands