181
7
Used memory
8
Recorded time
9
Start time
10
The current value of measurement items
11
Upper and lower scale of the trace
Start/Stop Recording
1
Press the
Setting
F key to enter the SETTINGS function menu. Set the log interval and then assign
up to four traces to one of the Measure parameters you turned on. If you don’t want to log them
all, set the extra traces to Null.
Figure 116 Settings Interface
2
Press the
Return
F key to return to the previous menu.
3
Press the
Start
F key to start to record. The record status at the top will display as "Run". During
the recording, the measure logger automatically adjusts the horizontal scale to show the trace.
You can also press the
Horizontal Scale/Position
button to enter manual mode to zoom and move
the recording trace.
Figure 117 Start to Record Measurement Data
4
Press the
Stop
F key to stop recording. The record status at the top will change to "Stop".
Summary of Contents for OSC-9200
