128
Time Measurements
Time measurements include 11 parameter measurements.
Figure 81 Time Measurements
1.
Period:
Period for every cycle in waveform at the 50% level, and positive slope.
2.
Frequency:
Frequency for every cycle in waveform at the 50% level and positive slope
3.
+ Width:
Width measured at 50% level and positive slope.
4.
- Width:
Width measured at 50% level and negative slope.
5.
Rise Time:
Duration of rising edge from 10-90%.
6.
Fall Time:
Duration of falling edge from 90-10%.
7.
BWid
: Time from the first rising edge to the last falling edge, or the first falling edge to the last
rising edge at the 50% crossing.
8.
+ Duty:
Ratio of positive width to period.
9.
- Duty:
Ratio of negative width to period.
10.
Delay
：
Time from the trigger to the first 50% crossing.
11.
T@L
：
Time from trigger of each transition at a specific level and slope, including Current, Max,
Min, Mean, and Stdev.
Summary of Contents for OSC-9200
