118
Math Function Operation
The oscilloscope can also calculate the signal’s derivative (d/dt), integral (
∫
dt) and square root (
).
Differentiate
d/dt
(differentiate) calculates the discrete time derivative (slope) of the selected source.
di =
y (i+dx) – y(i)
dx
Where:
l
d = differential waveform
l
y = voltage value of data point
l
i = data point index
l
dx = point-to-point time difference
The
dx
option under d/dt math function operation menu indicates the number of data points to take
the difference over. The minimum value is 4, and the unit is points.
Figure 73 Square Wave and Derivative
You can use d/dt to measure the instantaneous slope of a waveform. For example, the slew rate of an
operational amplifier may be measured using the d/dt function
Note
: Because d/dt is very sensitive to noise, it is helpful to set acquisition
mode to Average.
Summary of Contents for OSC-9200
