Aegis OSC-9200, User Manual

Page: 191 / 204

176
Recorder
The AEGIS-OSC-9200 includes a Sample Logger and Measure Logger, which record, respectively,
waveform and Measure data over time. The loggers are mainly useful for relatively low-frequency
signals. The sample logger can capture at most 25000 measurements per second, and the measure
logger can record 10 per second. The loggers will not efficiently capture high frequency signals.
Press
Recorder to enter the RECORDER function menu.
Figure 110 Recorder Menu
Sample Logger
The Sample logger can record points from waveforms in real time at equal intervals to allow long-term
observation of low frequency signals. The recorded data can be stored in the internal storage or on an
external storage device. After stopping recording, users can replay the waveform on the oscilloscope or
export the recorded data for analysis on a PC.
Press the
Sample Logger F key to enter the sample logger interface. At this time, most of the buttons
on the front panel will not respond, except for the menu F keys, Meter , Scope , Hide Menu and the
Universal Knob . Press the Exit F key to exit the sample logger.