178
Figure 112 Settings Interface
3
Press the
Return
F key to return to the RECORD function menu.
4
Press the
Start
F key to start to record, and the record status at the top will display as "Run".
Figure 113 Start Recording Waveform
5
Press the
Stop
F key to stop recording. The record status at the top will display as "Stop". The
data is automatically saved in the storage location.
6
Press the
Recall
F key to look back and analyze the waveform.
Recall Recorded Waveform
1
Press the
Recall
F key to enter the RECALL function menu.
2
Press the
Recall from
F key to select the storage path.
3
Press the
Press to Recall
F key to recall the recorded waveform data and enter the CONTROL menu
automatically.
Note
: When recording to a USB drive, the waveform data will be saved to
the drive in real time. Please do not remove the disk during the recording!
Summary of Contents for OSC-9200
