R3765/67G Series Network Analyzer Operation Manual
A.4 Soft Key Menu List
A-9
A.4
Soft Key Menu List
[MENU]
{POWER}
{SWEEP TIME [ ]}
{SWEEP TYPE [ ]}
{TRIGGER [ ]}
{POINTS}
{COUPLED CH ON/OFF}
{CW FREQ}
{RESTART}
{POWER}
{ATT MODE AUTO/FIX} * 1
{ATTENUATOR SOURCE} * 2
{ATTENUATOR PORT 1} * 3
{ATTENUATOR PORT 2} * 4
{ATTENUATOR PORT 3} * 5
{ATTENUATOR PORT 4} * 6
{Return}
{LIN FREQ}
{LOG FREQ}
{USER SWEEP}
{PROGRAM SWEEP}
{POW SWEEP}
{EDIT USER SWEEP}
{EDIT PROG SWEEP}
{Return}
{SEGMENT: NUMBER}
{START}
{STOP}
{FREQ}
{POINT}
{CLEAR SEG}
{CLEAR ALL SEG}
{Return}
{SEGMENT: NUMBER}
{START}
{STOP}
{POINT}
{CLEAR SEG}
{CLEAR ALL SEG}
{Return}
{More 1/2}
{SEGMENT: POWER}
{IF RBW}
{SETTLING TIME}
{Return}
{More 2/2}
{CONTINUOUS}
{SINGLE}
{HOLD}
{INT TRIG}
{EXT TRIG}
{TRIGGER DELAY}
{Return}
* 1: When OPT10 (Output attenuator) installed
* 2: AG type when OPT10 (Output attenuator) installed
* 3: BG/CG type when OPT10 (Output attenuator) installed
* 4: CG type when OPT10 (Output attenuator) installed
* 5: When OPT10 (Output attenuator) and OPT11 (Built-in 3-port Test Set)/OPT13 (Impedance: 75
Ω
, Built-in 3-port Test Set)/
OPT14 (Built-in 4-port Test Set) installed
* 6: When OPT10 (Output attenuator) and OPT14 (Built-in 4-port Test Set) installed
