R3765/67G Series Network Analyzer Operation Manual
7.2 ENTRY Block
7-3
7.2
ENTRY Block
The ENTRY block is used to set data input/change for the selected function by using the [Panel
key] and {Soft key}.
This block is also used to set/change a marker.
(1)
Numeric keys : [0] to [9] ;
Ten keys
[.] ;
Decimal point key
[-] ;
Minus sign key
[BS] ;
Back space key
[ENTRY OFF] ; Entry off key
Clears all numeric data and also cancels an input request.
Note : After numeric key operation, press unit keys.
Input numeric values by using numeric keys, a decimal point key and a minus sign key.
Then, press a unit key after inputting the numeric value.
Pressing the unit key determines the unit of the input numeric values and terminates nu-
meric entry. Namely the numeric entry is not complete until is specified by pressing a unit
key.
While an arrow (
) is being displayed on the left side of the active entry area, the numeric
entry does not complete.
ENT
p
ENTRY
OFF
BS
GHz
7
8
9
MHz
4
5
6
kHz
1
2
3
X1
0
•
–
n
µ
