ADInstruments Human NIBP Nano Owner'S Manual Download Page 89 | Manualshive

Page: 89 / 90

background image

84

Human NIBP Nano

Owner’s Guide

19. Agreement Changes

ADInstruments may, at its discretion, change, modify, add or remove portions of
the terms and conditions constituting this Agreement. ADInstruments will post
any such updated terms and conditions at http://www.adinstruments.com/license
at least thirty (30) days before any changes become effective.

Licensee’s continued use of the Software following the posting of updated terms
and conditions shall constitute Licensee’s acceptance of such updates.

20. Complete Agreement

This Agreement constitutes the entire agreement between the parties.

Amendments and modifications to this Agreement will not be accepted unless in
writing and signed by an authorized representative of ADInstruments.

C007F

Copyright © ADInstruments Pty Ltd, 2000 - 2018. All rights reserved. PowerLab,
MacLab, LabChart, LabTutor and LabAuthor are registered trademarks of
ADInstruments Pty Ltd. Chart and Scope (application programs), LabTutor Server
and LabTutor Online are trademarks of ADInstruments Pty Ltd. The names of
specific recording units, such as PowerLab 16/35, are trademarks of ADInstruments
Pty Ltd. Windows 8, Windows 7, Windows Vista and .NET Framework are trademarks
of Microsoft Corporation. Apple, the Apple logo, MacOS, and Macintosh are
trademarks of Apple Computer Inc. registered in the U.S. and other countries.
Acrobat and Adobe are registered trademarks of Adobe Systems Incorporated.
Igor is a trademark of Wavemetrics Inc. MATLAB is a registered trademark of The
MathWorks Inc. Grass is a trademark of Astro-Med Inc. All other trademarks are the
property of their respective owners.

«
...
87
88
89
90
»

Summary of Contents for Human NIBP Nano



























































































Reviews:

No comments

Related manuals for Human NIBP Nano

Brand: SAMCHULLY Pages: 48

Coronis 5MP Mammo

Brand: Barco Pages: 4

Brand: Barco Pages: 167

Color Coronis 2MP

Brand: Barco Pages: 156

Color Coronis 2MP

Brand: Barco Pages: 12

Brand: Barco Pages: 39

Brand: Barco Pages: 158

Brand: Parkside Pages: 95

Brand: Waterpik Pages: 2

Brand: Easylife Pages: 3

Brand: York Pages: 32

Sonorex Super RK 31

Brand: BANDELIN Pages: 21

BTL7-A/E501-M Series

Brand: Balluff Pages: 194

Brand: B.Pro Pages: 48

Brand: ABB Pages: 16

Brand: ABB Pages: 2

DependaBar DB-18-PCW

Brand: Healthcraft Pages: 13

Brand: Joyolight Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands