ADInstruments Human NIBP Nano Owner'S Manual Download Page 79 | Manualshive

Page: 79 / 90

background image

74

Human NIBP Nano

Owner’s Guide

address to which the Purchaser must ship the defective product at his or her own
expense. The product should be packed safely, preferably in its original packaging.
ADI will pay return shipping costs.

Hardware Warranty Limitations

This warranty applies only to the ADI hardware specified in this document and
used under normal operating conditions and within specification. Consumables,
electrodes and accessories are not covered by this warranty. Third party equipment
may be covered by the third party manufacturer’s warranty. To the extent that
ADI has the right to pass through any third party manufacturer warranties to
Purchaser it will do so to the extent it is able to do so. Copies of applicable
third party manufacturer warranties, to the extent they exist, are available upon
request. The warranty provided hereunder does not cover hardware modified in
any way, subjected to unusual physical, electrical or environmental stress, used
with incorrectly wired or substandard connectors or cables, or with the original
identification marks altered. Tampering with or breaking of the Warranty Seal will
also void the warranty.

Product Types & Warranty Term

ADI manufactured products covered by a ﬁ ve (5) year warranty

1

Data Acquisition Units: PowerLab 35 series with PL prefix

2

Front-ends: ADI Front-end Signal Conditioners with FE prefix.

ADI manufactured products covered by three (3) year warranty

3

Data Acquisition Units: PowerLab 26 series with ML prefix

4

Front-ends: ADI Front-end Signal Conditioners with ML prefix.

5

Pods: The entire range of ADI Pod Signal Conditioners.

ADI manufactured products covered by one (1) year warranty

6

Specialized Data Recorders: Metabolic Systems (e.g., ML240 PowerLab/8M

Metabolic System)

7

Instruments: Blood FlowMeter, Gas Analyzers, NIBP System (excluding

transducers), STH Pump Controller.

Third Party Products (Including Transducers)

Products not manufactured by ADI are covered by the manufacturer’s warranty.

Accessories and Consumables

Accessories and Consumables are not covered by any type of warranty.

«
...
77
78
79
80
81
...
»

Summary of Contents for Human NIBP Nano



























































































Reviews:

No comments

Related manuals for Human NIBP Nano

Brand: Calistair Pages: 44

Brand: Rabe Pages: 65

Brand: lancer Pages: 12

Movie FL Black E27 Flaps

Brand: Qazqa Pages: 2

Brand: RASHA PROFESSIONAL Pages: 11

Brand: MADRIX Pages: 24

Brand: MADRIX Pages: 28

Brand: Badger Meter Pages: 16

Brand: HALDER Pages: 2

Brand: Hakko Electronics Pages: 16

Brand: M-system Pages: 2

Brand: Rico Pages: 34

Brand: PacBio Pages: 13

Brand: Pablo Pages: 4

Brand: PA Pages: 28

Brand: Calibre Fitness Pages: 11

Brand: Fagor Pages: 92

Brand: Kanlux Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands