Adaptec 5325302057 - Snap Server 750i NAS, User Manual

Page: 38 / 236

Using Adaptec Storage Manager with a Firewall
32 Snap Server 700i Series User’s Guide
4
Unmount the CD:
For Red Hat
umount /mnt/cdrom
For SUSE
umount /media/cdrom
If you require the GUI and Agent or Management Service on more than one Linux
system, repeat the steps in this section. Otherwise, continue with “Setting Up Your
iSCSI Storage Appliance and IP SAN” on page 33.
Using Adaptec Storage Manager with a Firewall
If your network includes a firewall, you must unblock these ports:
• 8003 (TCP)—Allows inbound connections to the system running the Management
Service; allows outgoing connections on systems running the Windows Support
components (see page 17).
• 34580 (TCP)—Allows outbound connections from the system running the
Management Service; allows inbound connections for systems running the
Provisioning Agent (see page 17).
• 34570 to 34579 (TCP)—Supports Direct Attached Storage.
• 34570 (UDP)—Supports Direct Attached Storage.
• 34577 to 34580 (UDP)—Supports Direct Attached Storage.
Note
For more information, refer to the Adaptec Storage Manager User’s Guide for
Direct Attached Storage on the installation CD that came with your Adaptec DAS
RAID controller.
If you have installed the GUI and Agent or Management Service on a system
running Windows XP, you must also unblock the javaw process in the Windows
firewall. Refer to your operating system documentation for instructions.