manualshive.com logo in svg

Adaptec 5325302057 - Snap Server 750i NAS, User Manual

The Adaptec 5325302057 - Snap Server 750i NAS is a robust network-attached storage (NAS) solution designed to meet your data storage and sharing needs. To ensure a seamless user experience, we offer a comprehensive User Manual that can be downloaded for free from our website. Explore the advanced features and functionalities of this powerful NAS device with our user-friendly manual, available exclusively at manualshive.com.

Share
Download
background image

Monitoring Your GuardianOS-Powered Snap Servers

126 Snap Server 700i Series User’s Guide

Monitoring Your GuardianOS-Powered Snap Servers

When you start Adaptec Storage Manager, it automatically discovers any 

GuardianOS-powered Snap Servers on your network and lists them under the 

Network Attached Storage branch of the Enterprise View. You can use Adaptec Storage 

Manager to view and monitor your GuardianOS-powered Snap Servers. You can also 

launch the GuardianOS Admin Tool from Adaptec Storage Manager, to administer 

individual servers.

Note  

To manage a 

group

 of GuardianOS-powered Snap Servers (to update the 

firmware, for instance), use the Snap Server Manager software. For more 

information, refer to the User CD that came with your GuardianOS-powered Snap 

Server. Snap Server Manager is also downloadable from the Snap Server Web site at 

www.snapserver.com

.

Viewing Network Attached Storage Status

To check the status of all the GuardianOS-powered Snap Servers listed in Adaptec 

Storage Manager, click 

Network Attached Storage

 in the Enterprise View.

The Network Attached Storage View opens in the right panel of Adaptec Storage 

Manager and displays all discovered GuardianOS-powered Snap Servers. Each 

server’s name and other details are listed, and its status is indicated in text and by 

color.

What do the colors mean?

Adaptec Storage Manager indicates server status with the same colors used in Snap 

Server Manager. This table describes the status levels.

Color

Description

All status indicators are functioning properly (OK) 

One or more status indicators indicate a fault-level condition 

One or more status indicators indicate a warning-level condition 

The server is offline

Summary of Contents for 5325302057 - Snap Server 750i NAS













































































































































































































































Reviews:

No comments

Related manuals for 5325302057 - Snap Server 750i NAS

4IPNET WHG301 User Manual preview
WHG301
Brand: 4IPNET Pages: 97
Backyard READY SHED Instructions Manual preview
READY SHED
Brand: Backyard Pages: 63
Watchguard Firebox M470 Hardware Manual preview
Firebox M470
Brand: Watchguard Pages: 32
Ubiquiti EdgeRouter PRO Quick Start Manual preview
EdgeRouter PRO
Brand: Ubiquiti Pages: 20
TYAN FT77B-B7059 Service Engineer'S Manual preview
FT77B-B7059
Brand: TYAN Pages: 170
LaCie 301542U Quick Install Manual preview
301542U
Brand: LaCie Pages: 22
IBM RS/6000 44P Series 270 Service Manual preview
RS/6000 44P Series 270
Brand: IBM Pages: 346
JLCooper Electronics GangWay32 User Manual preview
GangWay32
Brand: JLCooper Electronics Pages: 12
Dot Hill AssuredSAN 4004 Series Fru Installation And Replacement Manual preview
AssuredSAN 4004 Series
Brand: Dot Hill Pages: 59
Tandberg Data STORAGE CAB4000 - Quick Install Manual preview
STORAGE CAB4000 -
Brand: Tandberg Data Pages: 13
Supermicro SuperServer 1029U-T Series Quick Reference Manual preview
SuperServer 1029U-T Series
Brand: Supermicro Pages: 1
Spectra Logic Spectra 50 Supplementary Manual preview
Spectra 50
Brand: Spectra Logic Pages: 15
Intermec Norand 6920 Reference Manual preview
Norand 6920
Brand: Intermec Pages: 232
Ubiquiti Amplifi AFi-LR Quick Start Manual preview
Amplifi AFi-LR
Brand: Ubiquiti Pages: 32
Atlantis Land I-FLY A02-WRA4-54G (Italian) Specifications preview
I-FLY A02-WRA4-54G
Brand: Atlantis Land Pages: 3
Planet Networking & Communication VRT-311 User Manual preview
VRT-311
Brand: Planet Networking & Communication Pages: 147
Billion BiPAC 7820NZ User Manual preview
BiPAC 7820NZ
Brand: Billion Pages: 100
Fujitsu PRIMERGY TX2550 M4 Upgrade And Maintenance Manual preview
PRIMERGY TX2550 M4
Brand: Fujitsu Pages: 563

Brands by name

Popular brands

Load more brands