manualshive.com logo in svg

Adaptec 5325302057 - Snap Server 750i NAS, User Manual

The Adaptec 5325302057 - Snap Server 750i NAS is a robust network-attached storage (NAS) solution designed to meet your data storage and sharing needs. To ensure a seamless user experience, we offer a comprehensive User Manual that can be downloaded for free from our website. Explore the advanced features and functionalities of this powerful NAS device with our user-friendly manual, available exclusively at manualshive.com.

Share
Download
background image

Example Command Line Installations

208 Snap Server 700i Series User’s Guide

Example Command Line Installations

• To install the basic options, which include the GUI, Agent, Readme, and SNMP 

Support:

setup.exe /s /v”/qn ADDLOCAL=Console,Agent,

,

ASMReadme,SNMPSupport”

• To install just the Agent and suppress a reboot at the end of installation:

setup.exe /s /v”/qn ADDLOCAL=Agent REBOOT=ReallySupress”

• To install all features silently, on a machine named COMP1234, then force a 

reboot:

setup.exe /s /v”/qn ADDLOCAL=ALL USERNAME=admin PASSWORD=pass 
REBOOT=Force MGMTLOC=COMP1234 MGMTUSER=admin MGMTPASS=pass”

Note  

This will install the DSM feature, which 

cannot

 be installed silently. You 

must click the Windows driver installation dialog box to successfully complete 

the DSM installation. (This is currently a Windows limitation.)

• To install only the CLI Tools and suppress a reboot:

setup.exe /s /v”/qn ADDLOCAL=CLITools REBOOT=ReallySuppress”

• To install the GUI feature to a different installation path:

setup.exe /s /v”/qn ADDLOCAL=Console INSTALLDIR=\”C:\Adaptec Storage Manager\””

• To install and have setup wait until the install finishes before it closes:

start /WAIT setup.exe /w /s /v”/qn ADDLOCAL=Console,Agent REBOOT=ReallySupress”

• To install the VDS/VSS Services with support for a remote Management Service 

(already installed on machine COMP1234):

setup.exe /s /v”/qn ADDLOCAL=VDSExternal,VSSExternal MGMTLOC=COMP1234 
MGMTUSER=admin MGMTPASS=pass”

MGMTPASS

Specifies the Management Service log-in password to set up VDS/VSS 

access. If you are installing the Management Service onto the local 

computer, this value is the same as the PASSWORD property.
*This Property is required only if VDSExternal or VSSExternal features are 

installed.

REBOOT
(Not Required)

l Force—Forces a reboot at the end of the installation.
l Suppress—Suppresses a reboot unless files were in use and could not 

be overwritten during installation.

l ReallySuppress—Suppresses all reboots at the end of the installation.
NOTE: A reboot is only forced by the Adaptec installer if you have installed 

the DSM feature, or if any files can’t be overwritten.

Property

Values

Summary of Contents for 5325302057 - Snap Server 750i NAS













































































































































































































































Reviews:

No comments

Related manuals for 5325302057 - Snap Server 750i NAS

NEC Univerge SV8100 System Maintenance Manual preview
Univerge SV8100
Brand: NEC Pages: 78
NEC Univerge SV8100 General Description Manual preview
Univerge SV8100
Brand: NEC Pages: 186
NEC Univerge SV8100 Configuration Manual preview
Univerge SV8100
Brand: NEC Pages: 150
NEC Univerge SV8100 Service Information Bulletin preview
Univerge SV8100
Brand: NEC Pages: 52
LaCie Brick User Manual preview
Brick
Brand: LaCie Pages: 29
Patton electronics 4520 Specification Sheet preview
4520
Brand: Patton electronics Pages: 2
Patton electronics 4520 Getting Started Manual preview
4520
Brand: Patton electronics Pages: 86
Moxa Technologies ioLogik W5300 Series User Manual preview
ioLogik W5300 Series
Brand: Moxa Technologies Pages: 177
NETGEAR DG834GT - 108 Mbps Super G Wireless ADSL Router Specifications preview
DG834GT - 108 Mbps Super G Wireless ADSL Router
Brand: NETGEAR Pages: 2
Hi-flying HF2221 User Manual preview
HF2221
Brand: Hi-flying Pages: 29
NEC N8100-1056F User Manual preview
N8100-1056F
Brand: NEC Pages: 408
Fastora Fastora NAS T2 Hardware Installation Manual preview
Fastora NAS T2
Brand: Fastora Pages: 24
7starlake SCH-401 User Manual preview
SCH-401
Brand: 7starlake Pages: 67
LaCie FastKey User Manual preview
FastKey
Brand: LaCie Pages: 54
StarTech.com RAIDBAY3 Installation Manual preview
RAIDBAY3
Brand: StarTech.com Pages: 7
HGST Ultrastar Serv24 S2122-N24-4 Installation Manual preview
Ultrastar Serv24 S2122-N24-4
Brand: HGST Pages: 36
NEC EXP339 User Manual preview
EXP339
Brand: NEC Pages: 128
SMC Networks SMC-EZ1026DT User Manual preview
SMC-EZ1026DT
Brand: SMC Networks Pages: 56

Brands by name

Popular brands

Load more brands