manualshive.com logo in svg

Adaptec 5325302057 - Snap Server 750i NAS, User Manual

The Adaptec 5325302057 - Snap Server 750i NAS is a robust network-attached storage (NAS) solution designed to meet your data storage and sharing needs. To ensure a seamless user experience, we offer a comprehensive User Manual that can be downloaded for free from our website. Explore the advanced features and functionalities of this powerful NAS device with our user-friendly manual, available exclusively at manualshive.com.

Share
Download
background image

Snap Server 700i Series User’s Guide

211

Glossary

Term

Definition

Adaptec Storage 
Manager Agent

Software component that runs in the background and 
communicates status and other information about any Adaptec 
direct attached storage on a system. The Agent requires no user 
intervention and includes no user interface.

Administrator

A level of access privilege that allows full access to Adaptec 
Storage Manager, your iSCSI Storage Appliance, and your IP 
SAN.

alien pool

A partially configured pool, usually created as a result of an error 
during pool creation, such as a power failure.

Appliance Software 
ID

Unique number that is used to identify your iSCSI Storage 
Appliance, and is required when you register your iSCSI Storage 
Appliance, receive technical support, and redeem feature keys 
(software license keys). The Appliance Software ID can be found 
on the Device tab of the Properties window for your iSCSI Storage 
Appliance.

available space

Space on a disk drive that is not being used by a logical device. 
When a logical device is deleted, its space becomes available. 

See also

 logical device.

cache

A temporary, fast storage area that holds data from a slower 
storage device for quick access. Cache storage is normally 
transparent to the accessing device.

CHAP Authentication

Challenge Handshake Authentication Password Authentication, a 
method of restricting access to your iSCSI Storage Appliance. 
When CHAP is enabled, your iSCSI Storage Appliance validates 
the identity of systems trying to access it by sending a challenge 
(such as a request for a password) and authenticating the 
response.

DHCP

Dynamic Host Configuration Protocol. Automatically assigns 
dynamic IP addresses to devices, such as controllers and iSCSI 
Storage Appliances, on a network.

Direct Attached 
Storage (DAS)

A storage system, such as a disk drive or enclosure, that’s directly 
attached to a server or workstation, not connected by a storage 
network. Also one branch of the Enterprise View tree in Adaptec 
Storage Manager. 

See also

 LAN, SAN.

domain name

The name given to the group of iSCSI Storage Appliances and 
systems that are part of the same IP SAN (share a common part 
of the IP address).

Summary of Contents for 5325302057 - Snap Server 750i NAS













































































































































































































































Reviews:

No comments

Related manuals for 5325302057 - Snap Server 750i NAS

HYVE AQUILADSF Manual preview
AQUILADSF
Brand: HYVE Pages: 22
StarTech.com IDECASE35SAT Instruction Manual preview
IDECASE35SAT
Brand: StarTech.com Pages: 8
iDirect iQ Desktop+ Installation, Support, And Maintenance Manual preview
iQ Desktop+
Brand: iDirect Pages: 52
Iomega eGo 34796 Quick Start Manual preview
eGo 34796
Brand: Iomega Pages: 36
Techroutes TSR 2800-30 Hardware Installation Manual preview
TSR 2800-30
Brand: Techroutes Pages: 20
Moxa Technologies NPort W2150Plus Series User Manual preview
NPort W2150Plus Series
Brand: Moxa Technologies Pages: 167
Fast Mover FMT1203 Instruction Manual preview
FMT1203
Brand: Fast Mover Pages: 2
TRENDnet TW100-W2plus Specifications preview
TW100-W2plus
Brand: TRENDnet Pages: 2
TRENDnet TE100-S2424V Specifications preview
TE100-S2424V
Brand: TRENDnet Pages: 2
ZyXEL Communications NBG6616 Quick Start Manual preview
NBG6616
Brand: ZyXEL Communications Pages: 4
Sun Oracle T5120 Getting Started Manual preview
T5120
Brand: Sun Oracle Pages: 6
TRENDnet TEW-752DRU User Manual preview
TEW-752DRU
Brand: TRENDnet Pages: 68
Western Digital WDBGLG0010HBK Product Specifications preview
WDBGLG0010HBK
Brand: Western Digital Pages: 2
IBM DGHS-318220 Manual preview
DGHS-318220
Brand: IBM Pages: 9
Fujitsu PRIMERGY RX2520 M4 Operating Manual preview
PRIMERGY RX2520 M4
Brand: Fujitsu Pages: 92
Fujitsu Primergy RX200 S4 Operating Manual preview
Primergy RX200 S4
Brand: Fujitsu Pages: 127
Fujitsu PRIMERGY RX200 S3 Operating Manual preview
PRIMERGY RX200 S3
Brand: Fujitsu Pages: 100
Fujitsu PRIMERGY RX200 S6 Operating Manual preview
PRIMERGY RX200 S6
Brand: Fujitsu Pages: 126

Brands by name

Popular brands

Load more brands