manualshive.com logo in svg

Adaptec 5325302057 - Snap Server 750i NAS, User Manual

The Adaptec 5325302057 - Snap Server 750i NAS is a robust network-attached storage (NAS) solution designed to meet your data storage and sharing needs. To ensure a seamless user experience, we offer a comprehensive User Manual that can be downloaded for free from our website. Explore the advanced features and functionalities of this powerful NAS device with our user-friendly manual, available exclusively at manualshive.com.

Share
Download
background image

Snap Server 700i Series User’s Guide

33

Chapter 4

Setting Up Your iSCSI Storage 
Appliance and IP SAN

Once you have installed Adaptec Storage Manager, your next task is to configure 

your iSCSI Storage Appliance and set up your iSCSI storage. Adaptec Storage 

Manager provides a wizard to guide you through these steps.

An Overview of the Setup Process

Adaptec Storage Manager provides automatic prompts and a wizard to help you 

configure your iSCSI Storage Appliance and set up your iSCSI storage. This is an 

overview of the seven basic steps:

1

Start Adaptec Storage Manager. Adaptec Storage Manager then prompts you to 

log in to a Management Service and add your iSCSI Storage Appliance.

2

The wizard opens automatically and prompts you configure your iSCSI Storage 

Appliance.

3

Register your iSCSI Storage Appliance.

4

The wizard prompts you create RAID pools (

pools

). Pools can be used 

immediately to provision storage; you don’t have to wait for them to finish 

building and verifying.

5

The wizard prompts you provision storage to your systems automatically 

(systems running Windows 2003 only) or manually.

6

Re-open the wizard to add more iSCSI Storage Appliances, create more pools, 

and provision more storage, as required.

Once setup in Adaptec Storage Manager is complete, two steps remain:

7

Log in to manually provisioned iSCSI storage.

Note  

Setup time depends on the amount of storage and number and types of 

systems in your IP SAN.

Summary of Contents for 5325302057 - Snap Server 750i NAS













































































































































































































































Reviews:

No comments

Related manuals for 5325302057 - Snap Server 750i NAS

Watchguard Wireless Router Quick Start Manual preview
Wireless Router
Brand: Watchguard Pages: 11
D-Link DWR-712 Quick Installation Manual preview
DWR-712
Brand: D-Link Pages: 32
D-Link DIR-456 Quick Installation Manual preview
DIR-456
Brand: D-Link Pages: 28
D-Link DIR-820 Quick Installation Manual preview
DIR-820
Brand: D-Link Pages: 48
D-Link EXO DIR-2660 Quick Installation Manual preview
EXO DIR-2660
Brand: D-Link Pages: 83
D-Link DIR-508L User Manual preview
DIR-508L
Brand: D-Link Pages: 155
IBM 610 Technical Overview And Introduction preview
610
Brand: IBM Pages: 40
Cambium Networks PTP 550 Series Quick Start Manual preview
PTP 550 Series
Brand: Cambium Networks Pages: 68
Cambium Networks PTP 820S Installation Manual preview
PTP 820S
Brand: Cambium Networks Pages: 110
Razberi V8 Core Manual And Getting Started Manual preview
V8
Brand: Razberi Pages: 113
F5 VIPRION 2400 Platform Manual preview
VIPRION 2400
Brand: F5 Pages: 72
F-SECURE SENSE Quick Manual preview
SENSE
Brand: F-SECURE Pages: 19
Far south networks Com.X1 PBX Getting Started preview
Com.X1 PBX
Brand: Far south networks Pages: 4
Juniper ACX2000 Hardware Manual preview
ACX2000
Brand: Juniper Pages: 190
Matrix Switch Corporation MSC-5-3232 Product Manual preview
MSC-5-3232
Brand: Matrix Switch Corporation Pages: 61
Aztech DSL1000EW(L) Speci?Cations preview
DSL1000EW(L)
Brand: Aztech Pages: 2
TP-Link Archer MR500 User Manual preview
Archer MR500
Brand: TP-Link Pages: 110
SanDisk 175972 User Manual preview
175972
Brand: SanDisk Pages: 2

Brands by name

Popular brands

Load more brands