manualshive.com logo in svg

Adaptec 5325302057 - Snap Server 750i NAS, User Manual

The Adaptec 5325302057 - Snap Server 750i NAS is a robust network-attached storage (NAS) solution designed to meet your data storage and sharing needs. To ensure a seamless user experience, we offer a comprehensive User Manual that can be downloaded for free from our website. Explore the advanced features and functionalities of this powerful NAS device with our user-friendly manual, available exclusively at manualshive.com.

Share
Download
background image

Monitoring Your GuardianOS-Powered Snap Servers

130 Snap Server 700i Series User’s Guide

2

Deselect 

Enable discovery at remote servers

, then click 

OK

.

Remote discovery is disabled. All GuardianOS-powered Snap Servers on remote 

subnets appear offline in Adaptec Storage Manager. (This may take a few 

minutes.)

3

To remove offline GuardianOS-powered Snap Servers from Adaptec Storage 

Manager, see page 129.

Opening the GuardianOS Administration Tool

You can view and modify the GuardianOS by launching the Web-based 

Administration Tool from Adaptec Storage Manager.
To open the GuardianOS Administration Tool, in the Enterprise View, right-click 

the server you want, then select 

Administer this server

. (You can also access the 

Administration Tool by right-clicking the server in the Network Attached Storage 

View and selecting 

Administer this server

.

The GuardianOS Administration Tool opens. For more information about the 

GuardianOS, and for instructions on using the Administration Tool, refer to the 

Snap 

Server Administrator Guide

 on the User CD or the Administration Tool online Help.

Changing the Network Attached Storage Management Settings

You can change these Network Attached Storage management settings to suit your 

requirements:
• Specify the Web browser for the Administration Tool (see page 131)
• Set the period after which a server is considered offline (see page 131)
• Specify whether Adaptec Storage Manager displays a warning if any server's 

Ethernet ports have no link (see page 131)

• Instruct Adaptec Storage Manager to directly scan all servers (see page 132)
• Configure an HTTP proxy server for online registration (see page 132)

A white 
status icon 
indicates an 
offline 
server

Summary of Contents for 5325302057 - Snap Server 750i NAS













































































































































































































































Reviews:

No comments

Related manuals for 5325302057 - Snap Server 750i NAS

NEC Univerge SV9300 Programming Manual preview
Univerge SV9300
Brand: NEC Pages: 47
NEC Univerge SV9100 Manual preview
Univerge SV9100
Brand: NEC Pages: 766
Aastra AXD Installation And Maintenance Manual preview
AXD
Brand: Aastra Pages: 502
IBM QS21 - BladeCenter - 0792 Installation And User Manual preview
QS21 - BladeCenter - 0792
Brand: IBM Pages: 110
Supermicro SUPERSERVER 5018D-MHR7N4P User Manual preview
SUPERSERVER 5018D-MHR7N4P
Brand: Supermicro Pages: 126
SAGEMCOM SE681 WiMAX User Manual preview
SE681 WiMAX
Brand: SAGEMCOM Pages: 75
4G Systems XSBox MOVE Quick Start Manual preview
XSBox MOVE
Brand: 4G Systems Pages: 2
IDT 89HPES16NT2 User Manual preview
89HPES16NT2
Brand: IDT Pages: 292
AMX NXA-ENET8POE Installation Manual preview
NXA-ENET8POE
Brand: AMX Pages: 2
IBM DTLA-305040 - Deskstar 41.1 GB Hard Drive Specifications preview
DTLA-305040 - Deskstar 41.1 GB Hard Drive
Brand: IBM Pages: 212
Selta Alyseo 106 User Manual preview
Alyseo 106
Brand: Selta Pages: 83
Pakedge Device & Software RK-1 Quick Start Manual preview
RK-1
Brand: Pakedge Device & Software Pages: 14
ICP DAS USA UA-5231M Quick Start preview
UA-5231M
Brand: ICP DAS USA Pages: 4
ADTRAN 1700600L2 Quick Start preview
1700600L2
Brand: ADTRAN Pages: 4
ActionTec MI424WR MI424WR Upgrade Procedure preview
MI424WR
Brand: ActionTec MI424WR Pages: 3
Synology DiskStation Series Upgrade Installation Instructions preview
DiskStation Series
Brand: Synology Pages: 6
Simplay3 41805 Quick Start Manual preview
41805
Brand: Simplay3 Pages: 2
Raidon InTANK IR2025 Quick Setup Manual preview
InTANK IR2025
Brand: Raidon Pages: 2

Brands by name

Popular brands

Load more brands