Adaptec 5325302057 - Snap Server 750i NAS, User Manual

Page: 48 / 236

Step 4: Provisioning Storage to Your Systems
42 Snap Server 700i Series User’s Guide
9
Click
Next
, review the volume settings, then click
Apply
.
Adaptec Storage Manager begins to create the volume(s). The wizard closes. To
use the Job Manager to monitor the volume creation, see “Monitoring Jobs in
Progress” on page 109.
You can begin using the volume for storage
immediately , without waiting for the
build/verify process to complete. For more information about volumes, see
“Creating and Modifying Volumes” on page 95.
To provision more storage, see “Step 5: Continuing to Build Your IP SAN” on
page 46.
Provisioning Storage Manually
Note
Use this provisioning method for systems running any supported OS other
than Windows 2003.
When you provision storage manually, you create a
logical device in Adaptec Storage
Manager that becomes the iSCSI target accessed by an iSCSI initiator. Once a logical
device is created, you must log into it from the iSCSI initiator and format it the same
way you would format a physical disk drive. Once the logical device is logged into
and formatted, it can be used to store data.
1
In the wizard, if the Add iSCSI Storage Host window has opened automatically,
click
Cancel
.
2
Select
Manual provisioning
, then click
Next
.
3
Select the pool you want by clicking its tab in the upper left-hand side of the
window, then click
Add
.