manualshive.com logo in svg

Adaptec 5325302057 - Snap Server 750i NAS, User Manual

The Adaptec 5325302057 - Snap Server 750i NAS is a robust network-attached storage (NAS) solution designed to meet your data storage and sharing needs. To ensure a seamless user experience, we offer a comprehensive User Manual that can be downloaded for free from our website. Explore the advanced features and functionalities of this powerful NAS device with our user-friendly manual, available exclusively at manualshive.com.

Share
Download
background image

Recovering from an iSCSI Storage Appliance Failure

150 Snap Server 700i Series User’s Guide

c

Right-click the Management Service, select 

Remove

, then select the name of the 

iSCSI Storage Appliance.

d

Right-click the Management Service, then select 

Add iSCSI storage appliance

.

The Add iSCSI Storage Appliance dialog box opens.

e

Enter the IP address of the iSCSI Storage Appliance, then click 

Add

.

f

If prompted, enter the administrator password you set while configuring your 

iSCSI Storage Appliance, but 

don’t

 enter a user name.

The iSCSI Storage Appliance appears in the Enterprise View, under the 

Management Service. 

g

If your iSCSI targets come back online, the recovery is complete. 
If you used new settings while configuring your iSCSI Storage Appliance, or if 

you used settings that were identical to the previous configuration but your 

iSCSI targets failed to come back online, continue with Step 5.

5

Reconnect your iSCSI initiators and iSCSI targets.

Follow the instructions in this section if you used new settings while configuring 

your iSCSI Storage Appliance, or if you used settings that were identical to the 

previous configuration but your iSCSI targets failed to come back online. You 

must complete the tasks in this section for each system on your IP SAN:
• For iSCSI Storage Hosts, see the next section.
• For systems running Windows XP, Linux, or VMware, see page 153.

Recovery on iSCSI Storage Hosts

Follow the steps in this section to reconnect each iSCSI Storage Host in your IPSAN.

Enabling Authentication

If any of the iSCSI targets (logical devices) on your iSCSI Storage Appliance have 

CHAP enabled, complete this task. Otherwise, skip to “Removing iSCSI Targets and 

Adding the Appliance IP Address” on page 151.

1

In the Logical Devices View, right the words ‘

Logical devices

’, then click 

Modify 

logical devices

.

The wizard opens to the Define Logical Devices screen.

2

Click 

Set CHAP Secret

.

3

In the Global User Name and Password Management window, enter a user name 

and password for a user that will have access to the logical device, then click 

Add

. 

Summary of Contents for 5325302057 - Snap Server 750i NAS













































































































































































































































Reviews:

No comments

Related manuals for 5325302057 - Snap Server 750i NAS

SAJ B1 Series User Manual preview
B1 Series
Brand: SAJ Pages: 28
DB GROUP HERRAJES 803 Assembly Instruction preview
803
Brand: DB GROUP HERRAJES Pages: 4
NEC Built-In AIT User Manual preview
Built-In AIT
Brand: NEC Pages: 59
Wyse C00LE Quick Start Manual preview
C00LE
Brand: Wyse Pages: 6
Mercusys MR30G Quick Installation Manual preview
MR30G
Brand: Mercusys Pages: 35
iBall Baton 150m Configuration Manual preview
150m
Brand: iBall Baton Pages: 9
garofalo HIMALAYA 100.S/2/CC User Manual preview
HIMALAYA 100.S/2/CC
Brand: garofalo Pages: 12
Linksys NSLU2 - Network Storage Link NAS Server Quick Installation Manual preview
NSLU2 - Network Storage Link NAS Server
Brand: Linksys Pages: 64
TRENDnet TEW-733GR User Manual preview
TEW-733GR
Brand: TRENDnet Pages: 62
Ravpower RP-IM013 Online Manual preview
RP-IM013
Brand: Ravpower Pages: 15
Gira 0535 00 Installation Instructions Manual preview
0535 00
Brand: Gira Pages: 6
HGST Ultrastar Serv24 S2122-N24-4 Installation Manual preview
Ultrastar Serv24 S2122-N24-4
Brand: HGST Pages: 36
Pakedge Device & Software RK-1 Quick Start Manual preview
RK-1
Brand: Pakedge Device & Software Pages: 14
SanDisk CompactFlash 5000 Product Manual preview
CompactFlash 5000
Brand: SanDisk Pages: 20
MaxComm M-150 Manual preview
M-150
Brand: MaxComm Pages: 10
Allied Telesis AT-AR3050S Installation Manual preview
AT-AR3050S
Brand: Allied Telesis Pages: 80
Conel LR77 v2 SL User Manual preview
LR77 v2 SL
Brand: Conel Pages: 32
NMS Communications Vision VS 5000 Installing preview
Vision VS 5000
Brand: NMS Communications Pages: 22

Brands by name

Popular brands

Load more brands