manualshive.com logo in svg

Adaptec 5325302057 - Snap Server 750i NAS, User Manual

The Adaptec 5325302057 - Snap Server 750i NAS is a robust network-attached storage (NAS) solution designed to meet your data storage and sharing needs. To ensure a seamless user experience, we offer a comprehensive User Manual that can be downloaded for free from our website. Explore the advanced features and functionalities of this powerful NAS device with our user-friendly manual, available exclusively at manualshive.com.

Share
Download
background image

Introduction to Adaptec Storage Manager for iSCSI Storage

14

Snap Server 700i Series User’s Guide

You can use Adaptec Storage Manager to:
• Combine physical disk drives into virtual storage pools (

pools

) that are protected 

with RAID, and increase the capacity or change the RAID level of existing pools.

• Protect and control access to your IP SAN and data.
• Monitor your IP SAN, using activity notifications and the event viewer in the 

main window.

• Maintain your iSCSI Storage Appliances.
• Provision storage to the systems on your network automatically (supported on 

some operating systems only) or manually.

• Create application-consistent snapshots of provisioned storage, for extra data 

protection (supported on some operating systems only).

• Create synchronous mirrors of provisioned storage, for an extra layer of data 

protection and increased data availability (supported on some operating systems 

only).

Note  

Synchronous mirroring requires a minimum of two iSCSI Storage 

Appliances.

Adaptec Storage Manager provides wizards to guide you through many of these 

tasks.

iSCSI Storage Feature Support

Support for Adaptec Storage Manager’s iSCSI storage features varies by operating 

system (OS)—depending on which OS is running on an individual system, either 

the full set or a subset of Adaptec Storage Manager iSCSI storage features is 

available on that system.
Additionally, the storage provisioning process may be automatic or manual for an 

individual system depending on which OS is installed.
Systems running Windows 2003 to which you provision storage are referred to in 

Adaptec Storage Manager as 

iSCSI Storage Hosts

.

The table on page 15 lists the features available for a system running one of the 

supported OSs. 

Summary of Contents for 5325302057 - Snap Server 750i NAS













































































































































































































































Reviews:

No comments

Related manuals for 5325302057 - Snap Server 750i NAS

D-Link DSL-500 Quick Start Manual preview
DSL-500
Brand: D-Link Pages: 11
D-Link AirPlus DWL-810 Quick Installation Manual preview
AirPlus DWL-810
Brand: D-Link Pages: 8
D-Link DHP-601AV Quick Installation Manual preview
DHP-601AV
Brand: D-Link Pages: 84
iDiskk mini Instruction Manual preview
mini
Brand: iDiskk Pages: 11
i-MO 540 Series Product Installation Manual preview
540 Series
Brand: i-MO Pages: 58
NEC Express5800/R310e-E4 User Manual preview
Express5800/R310e-E4
Brand: NEC Pages: 86
SafeNet Luna SA Configuration Manual preview
Luna SA
Brand: SafeNet Pages: 109
IBM totalstorage 200 Service Manual preview
totalstorage 200
Brand: IBM Pages: 180
Hirschmann OCTOPUS 5TX-EEC Description And Operating Instructions preview
OCTOPUS 5TX-EEC
Brand: Hirschmann Pages: 6
WaiLan DeltaFire 500 User Manual preview
DeltaFire 500
Brand: WaiLan Pages: 27
I-O Wireless WBC11 User Manual preview
WBC11
Brand: I-O Wireless Pages: 55
Xycom XVME-979 Manual preview
XVME-979
Brand: Xycom Pages: 27
BOH Enviromental BOH-CARGO-12-3 Operator & Maintenance Instructions preview
BOH-CARGO-12-3
Brand: BOH Enviromental Pages: 20
IBM xSeries 235 User Manual preview
xSeries 235
Brand: IBM Pages: 66
IBM IntelliStation R Pro Hardware Maintenance Manual preview
IntelliStation R Pro
Brand: IBM Pages: 194
iGateWeb.com iGate User Manual preview
iGate
Brand: iGateWeb.com Pages: 6
TYAN GC68-B8036 Service Engineer'S Manual preview
GC68-B8036
Brand: TYAN Pages: 106
G-Technology G-Drive ev SSD Product Manual preview
G-Drive ev SSD
Brand: G-Technology Pages: 33

Brands by name

Popular brands

Load more brands