manualshive.com logo in svg

Adaptec 5325302057 - Snap Server 750i NAS, User Manual

The Adaptec 5325302057 - Snap Server 750i NAS is a robust network-attached storage (NAS) solution designed to meet your data storage and sharing needs. To ensure a seamless user experience, we offer a comprehensive User Manual that can be downloaded for free from our website. Explore the advanced features and functionalities of this powerful NAS device with our user-friendly manual, available exclusively at manualshive.com.

Share
Download
background image

Understanding Adaptec Storage Manager’s Main Components

16

Snap Server 700i Series User’s Guide

Understanding Adaptec Storage Manager’s Main 

Components

During installation, you have the option to install up to three main components of 

Adaptec Storage Manager on a system:
• The GUI and Agent
• The Management Service
• Windows Support (see page 17)
Ensure that you understand the role of these components before continuing.

Note  

Component support varies by operating system. See page 203 for more 

information.

The GUI and the Agent

The 

GUI

 (or 

graphical user interface

) is the window that opens when you run Adaptec 

Storage Manager. You build, monitor, and modify your IP SAN from the GUI.
The Adaptec Storage Manager 

Agent

 is a software component that runs in the 

background and communicates status and other information about any Adaptec 

direct attached storage on a system. The Agent requires no user intervention and 

includes no user interface.
The GUI and Agent must be installed on at least one system in your IP SAN. See 

“Installing Adaptec Storage Manager” on page 27 for more information.

The Management Service

The 

Management Service

 is the software component that coordinates and enables 

communication between your iSCSI Storage Appliance and the iSCSI Storage Hosts 

on your IP SAN. The Management Service also:
• Monitors your iSCSI Storage Appliance and IP SAN.
• Generates event alerts when activity, errors, or failures occur.
• Controls access to Adaptec Storage Manager and your IP SAN.
• Monitors jobs in progress and can schedule jobs to occur at a future time. 
Similar to the Agent, the Management Service runs in the background, requires no 

user intervention, and includes no user interface. 
A Management Service manages and monitors only the iSCSI Storage Appliances 

and iSCSI Storage Hosts that are added to it in Adaptec Storage Manager. (In the 

main window of Adaptec Storage Manager, the iSCSI Storage Appliances and iSCSI 

Storage Hosts are listed under the Management Service, as shown in the figure on 

page 17.)

Summary of Contents for 5325302057 - Snap Server 750i NAS













































































































































































































































Reviews:

No comments

Related manuals for 5325302057 - Snap Server 750i NAS

D-Link DSL-500 Command Reference Manual preview
DSL-500
Brand: D-Link Pages: 15
D-Link DSN-4100 Series Quick Start Manual preview
DSN-4100 Series
Brand: D-Link Pages: 2
Ubiquiti Bullet Quick Start Manual preview
Bullet
Brand: Ubiquiti Pages: 40
IBM TotalStorage SAN16M-R SAN Installation And Service Manual preview
TotalStorage SAN16M-R SAN
Brand: IBM Pages: 116
Obvius AcquiLite EMB Installation And Operation Manual preview
AcquiLite EMB
Brand: Obvius Pages: 29
morse 400A-96-125 Operator'S Manual preview
400A-96-125
Brand: morse Pages: 6
Zonet ZSR4134WS User Manual preview
ZSR4134WS
Brand: Zonet Pages: 53
Patton electronics EtherBITS 2285 Getting Started Manual preview
EtherBITS 2285
Brand: Patton electronics Pages: 121
hager TJA670 domovea Basic Manual preview
TJA670 domovea Basic
Brand: hager Pages: 36
ZyXEL Communications Prestige 2864I Getting Started preview
Prestige 2864I
Brand: ZyXEL Communications Pages: 8
TP-Link TD-W8101G Quick Installation Manual preview
TD-W8101G
Brand: TP-Link Pages: 16
Modecom MC-421 Quick Installation Manual preview
MC-421
Brand: Modecom Pages: 16
Supero SUPERSERVER 1017GR-TF User Manual preview
SUPERSERVER 1017GR-TF
Brand: Supero Pages: 100
JOBO GIGA ONE ULTRA Instruction Manual preview
GIGA ONE ULTRA
Brand: JOBO Pages: 20
H3C WT2024-U-PWR Compliance And Safety Manual preview
WT2024-U-PWR
Brand: H3C Pages: 51
NETGEAR DG834GUV5 User Manual preview
DG834GUV5
Brand: NETGEAR Pages: 120
SMC Networks EZ Switch SMC-1026DT V.2 User Manual preview
EZ Switch SMC-1026DT V.2
Brand: SMC Networks Pages: 27
Ubiquiti EdgeRouter X ER-X-SFP Quick Start Manual preview
EdgeRouter X ER-X-SFP
Brand: Ubiquiti Pages: 20

Brands by name

Popular brands

Load more brands