manualshive.com logo in svg

Adaptec 5325302057 - Snap Server 750i NAS, User Manual

The Adaptec 5325302057 - Snap Server 750i NAS is a robust network-attached storage (NAS) solution designed to meet your data storage and sharing needs. To ensure a seamless user experience, we offer a comprehensive User Manual that can be downloaded for free from our website. Explore the advanced features and functionalities of this powerful NAS device with our user-friendly manual, available exclusively at manualshive.com.

Share
Download
background image

Snap Server 700i Series User’s Guide

137

Chapter 12

Solving Problems

This chapter provides tips to help you resolve problems on your iSCSI Storage 

Appliance using Adaptec Storage Manager.

General Troubleshooting Tips

If you experience problems installing or using Adaptec Storage Manager, follow 

these suggestions:
• Ensure that Adaptec Storage Manager is properly installed on the management 

system.

• Ensure that no one is running Adaptec Storage Manager remotely on the 

management system. (Adaptec Storage Manager will only open once on a 

system.)

• Ensure that an iSCSI initiator is properly installed on each system. (The Windows 

Support components of Adaptec Storage Manager can’t be installed on a system 

until an iSCSI initiator is installed.)
If the system is running Windows 2003, ensure that the Microsoft Software 

Initiator is installed, even if a hardware iSCSI initiator is also installed.

• Ensure that all iSCSI Storage Hosts are powered on and that they have the 

Windows Support components of Adaptec Storage Manager installed on them. 

(See page 17 for more information.)

• Ensure that the system on which you’re running the Adaptec Storage Manager 

GUI supports 256 color video mode.

• Ensure that you have correctly set the IP addresses of the data ports on your 

iSCSI Storage Appliance (see page 36).

• Ensure that you have logged into the Management Service as an Administrator.
• Check all cable connections.
• Try uninstalling and reinstalling Adaptec Storage Manager.

Caution  

To avoid permanent data loss, 

do not

 modify the default BIOS settings of 

the RAID controller. To safely configure or modify the iSCSI Storage Appliance, use 

either Adaptec Storage Manager or the CLI only.

Summary of Contents for 5325302057 - Snap Server 750i NAS













































































































































































































































Reviews:

No comments

Related manuals for 5325302057 - Snap Server 750i NAS

N-Tron 700 Series User Manual & Installation Manual preview
700 Series
Brand: N-Tron Pages: 101
D-Link DSL-G2562DG Quick Start Manual preview
DSL-G2562DG
Brand: D-Link Pages: 2
NEC NECCare Gold Express5800/320Fd Service Manual preview
NECCare Gold Express5800/320Fd
Brand: NEC Pages: 10
NEC SV8500 Setup Manual preview
SV8500
Brand: NEC Pages: 84
NEC NEC Express5800 Series Release Note preview
NEC Express5800 Series
Brand: NEC Pages: 6
B&B Electronics Serial Servers Vlinx VESR9xx Instruction Manual preview
Serial Servers Vlinx VESR9xx
Brand: B&B Electronics Pages: 61
Cabletron Systems SmartSwitch Router User'S Reference Manual preview
SmartSwitch Router
Brand: Cabletron Systems Pages: 338
JCG Q5 Quick Installation Manual preview
Q5
Brand: JCG Pages: 3
Moxa Technologies ioLogik W5300 Series User Manual preview
ioLogik W5300 Series
Brand: Moxa Technologies Pages: 177
NETGEAR DG834GT - 108 Mbps Super G Wireless ADSL Router Specifications preview
DG834GT - 108 Mbps Super G Wireless ADSL Router
Brand: NETGEAR Pages: 2
Overland Storage ULTAMUS Read Me First preview
ULTAMUS
Brand: Overland Storage Pages: 2
Mobatime DTS 4132.timeserver Mounting And Instruction Manual preview
DTS 4132.timeserver
Brand: Mobatime Pages: 108
Macpower & Tytech M9 - NDAS User Manual preview
M9 - NDAS
Brand: Macpower & Tytech Pages: 21
HPE FlexNetwork 5130 Series Troubleshooting Manual preview
FlexNetwork 5130 Series
Brand: HPE Pages: 33
Intel SBXL52 - Server Compute Blade Hardware Maintenance Manual preview
SBXL52 - Server Compute Blade
Brand: Intel Pages: 126
Seagate Momentus ST9120827AS Product Manual preview
Momentus ST9120827AS
Brand: Seagate Pages: 56
MaxComm M-150 Manual preview
M-150
Brand: MaxComm Pages: 10
Tiger Serve1 Assembly Manual preview
Serve1
Brand: Tiger Pages: 16

Brands by name

Popular brands

Load more brands