manualshive.com logo in svg

Adaptec 5325302057 - Snap Server 750i NAS, User Manual

The Adaptec 5325302057 - Snap Server 750i NAS is a robust network-attached storage (NAS) solution designed to meet your data storage and sharing needs. To ensure a seamless user experience, we offer a comprehensive User Manual that can be downloaded for free from our website. Explore the advanced features and functionalities of this powerful NAS device with our user-friendly manual, available exclusively at manualshive.com.

Share
Download
background image

iSCSI Configuration for Microsoft Windows

164 Snap Server 700i Series User’s Guide

Configuring the QLogic QLA4050 and QLA4052 iSCSI Initiators for 
Microsoft Windows

Requirements

• Windows 2003, Windows 2000, Windows XP installed server.
• Microsoft iSCSI Software Initiator

Installing the Adapter

1

Install the QLA4050/4052 adapter on a system running Windows 2003 or 

Windows 2000 Server or Windows XP Professional SP3.

2

Boot up the system and follow the Windows

 Found New Hardware

 dialog to load 

the associated driver software.

3

Install SANSurfer, which came with the adapter.

Configuring the QLA4050/QLA4052 iSCSI Initiator 

QLogic's QLA4050/4052 is an iSCSI adapter that appears as a SCSI adapter instead 

of a network adapter in Windows Device Manager. Before it can successfully 

connect to iSCSI targets, you must:
• Set initiator parameters (for example, initiator name, alias, IP address).
• Enter target information (for example, target portal information and target iSCSI 

name).

• Configure the adapter’s BIOS. Refer to article 14837 on the Adaptec Support 

Knowledgebase at 

www.adaptec.com

.

You can use either the SANSurfer Management application that came with the 

QLA4050/4052 or Microsoft’s iSCSI initiator applet to set initiator parameters and 

enter target information. 

Summary of Contents for 5325302057 - Snap Server 750i NAS













































































































































































































































Reviews:

No comments

Related manuals for 5325302057 - Snap Server 750i NAS

D-Link DES-1228/ME User Manual preview
DES-1228/ME
Brand: D-Link Pages: 267
LaCie Hard Disk MAX Quadra Datasheet preview
Hard Disk MAX Quadra
Brand: LaCie Pages: 2
LaCie 8BIG RACK THUNDERBOLT 2 Quick Start Manual preview
8BIG RACK THUNDERBOLT 2
Brand: LaCie Pages: 28
QNAP TS-269 Pro Software User Manual preview
TS-269 Pro
Brand: QNAP Pages: 321
NetComm 3GM1WN Quick Start Manual preview
3GM1WN
Brand: NetComm Pages: 3
IBM Flex System x240 Compute Node Product Manual preview
Flex System x240 Compute Node
Brand: IBM Pages: 28
Buffalo SSD-WA1.0T User Manual preview
SSD-WA1.0T
Brand: Buffalo Pages: 77
Ruckus Wireless MediaFlex NG Quick Installation Manual preview
MediaFlex NG
Brand: Ruckus Wireless Pages: 2
Rosewill RNX-N150RT Quick Installation Manual preview
RNX-N150RT
Brand: Rosewill Pages: 10
Cowfish Technologies VanConnect User Manual And Installation Manual preview
VanConnect
Brand: Cowfish Technologies Pages: 38
Cabletron Systems SmartSwitch 8-slot User'S Reference Manual preview
SmartSwitch 8-slot
Brand: Cabletron Systems Pages: 150
Patton IPLink 2603 Series User Manual preview
IPLink 2603 Series
Brand: Patton Pages: 120
U-Line H-3619 Assembly Instructions Manual preview
H-3619
Brand: U-Line Pages: 15
Altos R380 F5 User Manual preview
R380 F5
Brand: Altos Pages: 93
IBM Netfinity 5000 Setup And Installation Manual preview
Netfinity 5000
Brand: IBM Pages: 24
Supermicro SuperServer 6019P-WT User Manual preview
SuperServer 6019P-WT
Brand: Supermicro Pages: 133
Billion BEC MX-1000 User Manual preview
BEC MX-1000
Brand: Billion Pages: 158
Hama FlashPen Operating Instruction preview
FlashPen
Brand: Hama Pages: 8

Brands by name

Popular brands

Load more brands