manualshive.com logo in svg

Adaptec 5325301507 - Snap Server 4400 NAS, Administrator'S Manual

The Adaptec 5325301507 - Snap Server 4400 NAS is a powerful storage solution for your business needs. Make the most out of its features by referring to the comprehensive Administrator's Manual. Download this manual for free from our website and unlock the full potential of this remarkable product.

Share
Download
background image

FTP/FTPS Access

36

SnapServer Administrator Guide

Supported AFP Clients

The SnapServer supports MacOS 9.x and 10.x clients.

FTP/FTPS Access 

FTP and FTPS settings are configured on the 

Network > FTP

 screen of the 

Administration Tool. FTPS adds encryption to FTP for increased security. By 

default, FTP and FTPS clients can access the server using the anonymous user 

account, which is mapped to the SnapServer's 

guest

 user account and 

AllUsers

 

group account. You can set share access and file access for anonymous FTP users by 

modifying permissions for these accounts. For more granular control over FTP 

access, you must create local user accounts for FTP users.
SnapServer also supports explicit FTPS (i.e., FTPES or Auth TLS).

Note  

If standard FTP is enabled, only the data channel is encrypted for FTPS 

connections—the control channel (including user password) is not encrypted. To 

force FTPS to encrypt the control channel as well, disable standard FTP.

Supported FTP Clients

SnapServers have been tested with the most common FTP clients and work as 

expected based on the commands required by RFC 959.

 

SnapServers have been 

proven to work with these products for standard FTP: Internet Explorer 6.0 and 

later, Safari 2.0 and later, and FireFox 2.0 and later. 

Note  

Most standard FTP clients do not support FTPS. A client designed to support 

FTPS is required for FTPS connections.
To connect to the server through FTPS:
• Configure your FTPS client application to use explicit FTPS (i.e., FTPES or "Auth 

TLS").

• Enter the SnapServer's server name or IP address.

Summary of Contents for 5325301507 - Snap Server 4400 NAS



























































































































































































































































Reviews:

No comments

Related manuals for 5325301507 - Snap Server 4400 NAS

Watchguard Wireless Router Quick Start Manual preview
Wireless Router
Brand: Watchguard Pages: 11
D-Link DWR-712 Quick Installation Manual preview
DWR-712
Brand: D-Link Pages: 32
D-Link DIR-456 Quick Installation Manual preview
DIR-456
Brand: D-Link Pages: 28
D-Link DIR-820 Quick Installation Manual preview
DIR-820
Brand: D-Link Pages: 48
D-Link EXO DIR-2660 Quick Installation Manual preview
EXO DIR-2660
Brand: D-Link Pages: 83
D-Link DIR-508L User Manual preview
DIR-508L
Brand: D-Link Pages: 155
NEC Express5800/320Ma Planning Manual preview
Express5800/320Ma
Brand: NEC Pages: 80
NEC Express5800/320Ma Technical Reference Manual preview
Express5800/320Ma
Brand: NEC Pages: 90
N-Tron 7018 User Manual & Installation Manual preview
7018
Brand: N-Tron Pages: 138
Quantum P1000 Series Unpacking Instructions Manual preview
P1000 Series
Brand: Quantum Pages: 32
Niveo NWAR33P User Manual preview
NWAR33P
Brand: Niveo Pages: 155
Premio FlacheSAN1L-D4 Quick Manual preview
FlacheSAN1L-D4
Brand: Premio Pages: 3
Seagate ST31000333AS - Barracuda 7200.11 1 TB SATA 32 MB Cache Bulk/OEM Hard Drive Datasheet preview
ST31000333AS - Barracuda 7200.11 1 TB SATA 32 MB Cache Bulk/OEM Hard Drive
Brand: Seagate Pages: 2
Patton electronics 3087 Quick Start Manual preview
3087
Brand: Patton electronics Pages: 12
Surveon EonServ 5000 Series User Manual preview
EonServ 5000 Series
Brand: Surveon Pages: 33
Vxl Itona C23S Specifications preview
Itona C23S
Brand: Vxl Pages: 2
Yardmaster 54 PEZ Silver Assembly Instructions Manual preview
54 PEZ Silver
Brand: Yardmaster Pages: 16
Sun Microsystems Sun Fire V20z Replacing preview
Sun Fire V20z
Brand: Sun Microsystems Pages: 4

Brands by name

Popular brands

Load more brands