Adaptec 5325301507 - Snap Server 4400 NAS, Administrator'S Manual

Page: 174 / 250

Off-the-Shelf Backup Solutions for the SnapServer
158 SnapServer Administrator Guide
cli group member add group-name=beoper user-name=root
Note
If using a local Snap user account other than root or admin , and if password
policies are enabled, configure the user to be exempt from password expiration.
See “To Set Password Policy for Local Users” on page 68.
5
Start the Backup Exec RALUS agent by rebooting the SnapServer either through
the Admin Tool (
Maintenance > Restart
), or by typing:
/etc/rc.d/init.d/VRTSralus.init start
6
Verify that using Backup Exec, you can create a job using the UNIX agent:
a
Create a Guardian Root login account on the Backup Exec server.
b
Connect as root (the password will be the same as the admin account
password).
c
Create a job and choose the Unix agent representing the SnapServer.
d
Verify that you can connect to the agent, configure a job, and run the job.
Uninstall the Backup Exec RALUS AGENT
1
To uninstall the RALUS Agent, you will need the tar or install directory that you
copied to the SnapServer when you installed the Agent (follow Steps 1 through 3
of Install Backup Exec RALUS Agent). Make sure you see the script
uninstallralus
2
Type:
./uninstallralus
Follow the prompts.
3
Verify that the Symantec RALUS agent has been uninstalled by typing the
following command:
rpm -qa | grep VRTS