Adaptec 5325301507 - Snap Server 4400 NAS Administrator'S Manual Download

Page: 155 / 250

SnapServer Administrator Guide

139

SnapServer Administrator Guide

139

Chapter 10

Unicode

This section details how the GuardianOS SnapServer operates when Unicode is

enabled.

Topics in Unicode

• What is Unicode?
• Converting to Unicode
• Unicode and Protocol Interaction
• How Snapshots Interact with Unicode
• Backing Up Unicode Servers
• Unicode and Expansion Arrays

What is Unicode?

GuardianOS supports Unicode. Unicode defines a universal means of representing

characters in all languages. In the case of SnapServers, this allows better

interoperation of varying languages using different alphabets and character sets in

file and user names. More information is available at

http://www.unicode.org

Caution

Once Unicode has been enabled on a GuardianOS SnapServer, it is not

possible to disable Unicode. Enabling Unicode will alter the functionality of some

third party applications and SnapExtensions that do not fully support Unicode.

Converting to Unicode

To convert your GuardianOS SnapServer to Unicode, complete the following steps:

Step 1: Make a DRImage of your current system and volume settings

Before converting your system to Unicode, configure all system and volume

settings, then make a DRImage of your system and volume(s). This is to ensure all

your settings and data are saved should something unforeseen happen during the

Unicode conversion process. For more information about creating a DRImage,

please see “Disaster Recovery Procedural Overview” on page 123.

Summary of Contents for 5325301507 - Snap Server 4400 NAS



























































































































































































































































Search results

Summary of Contents for 5325301507 - Snap Server 4400 NAS

Reviews:

Related manuals for 5325301507 - Snap Server 4400 NAS

Brands by name

Popular brands

Adaptec 5325301507 - Snap Server 4400 NAS, Administrator'S Manual

Search results

Summary of Contents for 5325301507 - Snap Server 4400 NAS

Reviews:

Related manuals for 5325301507 - Snap Server 4400 NAS

Brands by name

Popular brands