manualshive.com logo in svg

Adaptec 5325301507 - Snap Server 4400 NAS, Administrator'S Manual

The Adaptec 5325301507 - Snap Server 4400 NAS is a powerful storage solution for your business needs. Make the most out of its features by referring to the comprehensive Administrator's Manual. Download this manual for free from our website and unlock the full potential of this remarkable product.

Share
Download
background image

Off-the-Shelf Backup Solutions for the SnapServer

Appendix A  Backup and Replication Solutions

151

Off-the-Shelf Backup Solutions for the SnapServer

Note  

These backup packages do not support the backup of Windows ACLs or 

legacy POSIX ACLs. If you use one of these packages, Overland Storage strongly 

recommends you create a SnapServer disaster recovery image (see page 118) before 

you perform a backup.
In addition to the integrated backup solutions, GuardianOS supports a number of 

off-the-shelf backup packages that the user can install on the SnapServer, including:
• CA BrightStor ARCserver 11.5, 12.0
• EMC Legato NetWorker 7.3, 7.4
• Symantec Backup Exec 11d, 12, 12.5
• Symantec NetBackup 6.5

Note  

GuardianOS 5.0 and higher support the above versions of these backup 

solutions only. 

Preparing to Install a Backup Solution

Before performing one of the backup solution installation procedures described 

here, make sure you have the following information and tools:

• Backup and media server IP addresses — 

Most backup agents need to know the 

IP addresses of the backup and media servers you plan to use with the 

SnapServer. Use the 

Maintenance > Host File Editor

 screen in the SnapServer’s 

Administration Tool to supply a host-name-to-ip-address mapping that persists 

across system reboots.

• SnapServer is seen by Backup software as a UNIX/Linux client — 

When you 

configure a backup server to see the agent or client running on the SnapServer,

 

assume the server is a UNIX or Linux client. 

• The agent/client files required by your backup software — 

Typically, these files 

are either provided on your backup software’s User CD or are available for 

download from the manufacturer’s website. You will need to copy these files 

(usually delivered in a compressed format, e.g., as 

*.rpm

, 

*.tgz

, or 

*tar

 files) to the 

SnapServer.

• A secure shell (SSH) client — 

To remotely install any backup solution on the 

SnapServer, you must have an SSH client installed on a remote workstation. The 

SnapServer SSH implementation requires SSH v2. If you do not already have an 

SSH client application installed, you can download one from the Internet. 

Note  

The commands you must enter via SSH to install your backup agent are 

case sensitive; pay careful attention to the capitalization of commands, and enter 

them exactly as shown.

Summary of Contents for 5325301507 - Snap Server 4400 NAS



























































































































































































































































Reviews:

No comments

Related manuals for 5325301507 - Snap Server 4400 NAS

D-Link DI-634M Quick Installation Manual preview
DI-634M
Brand: D-Link Pages: 12
Tyco Electronics 8 Port 10/100Mbit/s Ethernet Smart Switch with Fibre Uplink Product User Manual preview
8 Port 10/100Mbit/s Ethernet Smart Switch with Fibre Uplink
Brand: Tyco Electronics Pages: 18
Moxa Technologies ICS-G7748A Series Quick Installation Manual preview
ICS-G7748A Series
Brand: Moxa Technologies Pages: 10
NETGEAR RP614 v2 Installation Manual preview
RP614 v2
Brand: NETGEAR Pages: 2
IEI Technology PUZZLE-IN003A User Manual preview
PUZZLE-IN003A
Brand: IEI Technology Pages: 89
IBM System x3250 M3 Type 4251 Manual preview
System x3250 M3 Type 4251
Brand: IBM Pages: 32
TP-Link TL-SG2424P User Manual preview
TL-SG2424P
Brand: TP-Link Pages: 176
Morrell SW-UNM-24FE2GC-24POE User Manual preview
SW-UNM-24FE2GC-24POE
Brand: Morrell Pages: 8
Weidmuller IE-SW-PL09M-5GC-4GT Hardware Installation Manual preview
IE-SW-PL09M-5GC-4GT
Brand: Weidmuller Pages: 15
Flexport HF2211 User Manual preview
HF2211
Brand: Flexport Pages: 39
Alfa Network AC1200R Setup Manual preview
AC1200R
Brand: Alfa Network Pages: 11
ZyXEL Communications NBG6616 Quick Start Manual preview
NBG6616
Brand: ZyXEL Communications Pages: 4
Orcon Netcom NB6 Installation preview
Netcom NB6
Brand: Orcon Pages: 2
IBM Travelstar 10E Installation And Operation Manual preview
Travelstar 10E
Brand: IBM Pages: 11
Hirschmann MM2-2FXM3/2TX1 Description And Operating Instructions preview
MM2-2FXM3/2TX1
Brand: Hirschmann Pages: 8
Lancom 1711+ VPN Manual preview
1711+ VPN
Brand: Lancom Pages: 79
Oracle Storage 6180 Array Getting Started Manual preview
Storage 6180 Array
Brand: Oracle Pages: 6
Oracle StorageTek SL3000 Manual preview
StorageTek SL3000
Brand: Oracle Pages: 216

Brands by name

Popular brands

Load more brands