Adaptec 5325301507 - Snap Server 4400 NAS Administrator'S Manual Download

Page: 98 / 250

Configuring iSCSI Initiators

SnapServer Administrator Guide

Configuring Dynamic Disks to Persistently Reconnect

On pre-Vista operating systems, when iSCSI targets are configured as dynamic

disks, the Microsoft iSCSI initiator connecting to the dynamic disk may fail to

connect properly during system boot. Using dynamic disks for iSCSI targets on pre-

Vista operating systems is not supported by Microsoft. For more information, see

the

Microsoft iSCSI Software Initiator User’s Guide,

available on the Microsoft web site

(

uguide.doc

Using the Microsoft Diskpart Utility to Grow iSCSI Basic Disks

In a Microsoft environment,

basic disk

is the simplest configuration method for an

iSCSI disk. Basic disks are given the highest priority at both system and application

services startup to ensure proper initialization.
For Vista, Windows 7, and Windows 2008 Server, use the Disk Management utility.

For Windows 2003 Server, Windows 2000 Server, and Windows XP, Microsoft

offers a command line utility called Diskpart that allows you to expand basic disks.

This utility ships with Windows 2003 Server, and is available for download for

Windows 2000 Server and XP. Additional details on the Diskpart utility can be

found in Microsoft Knowledge Base article Q300415 (

http://

support.microsoft.com/kb/300415

Preparing to Expand a Microsoft Basic iSCSI Disk

The following steps must be taken to prepare for the expansion of a basic iSCSI disk

from a Windows host:

Using the Microsoft Services GUI, stop all application services that are using the

volume you intend to expand.

If it is not already installed, load the Diskpart utility on the host machine that is

running the iSCSI initiator

Note

If Diskpart is already installed, you will get the appropriate response when

entering

diskpart -

at the command line. If the command returns

command not

found,

locate diskpart on the Microsoft website, download the utility, and install

it on the local host.

Log off the iSCSI volume that is to be expanded.

• Open the Microsoft initiator tool.
• Under Connected Targets, highlight the specific iSCSI disk(s) you want to

expand.

• Click

LogOff

. This will log you off the specific target.

Summary of Contents for 5325301507 - Snap Server 4400 NAS



























































































































































































































































Search results

Summary of Contents for 5325301507 - Snap Server 4400 NAS

Reviews:

Related manuals for 5325301507 - Snap Server 4400 NAS

Brands by name

Popular brands

Adaptec 5325301507 - Snap Server 4400 NAS, Administrator'S Manual

Search results

Summary of Contents for 5325301507 - Snap Server 4400 NAS

Reviews:

Related manuals for 5325301507 - Snap Server 4400 NAS

Brands by name

Popular brands