manualshive.com logo in svg

Adaptec 5325301507 - Snap Server 4400 NAS, Administrator'S Manual

The Adaptec 5325301507 - Snap Server 4400 NAS is a powerful storage solution for your business needs. Make the most out of its features by referring to the comprehensive Administrator's Manual. Download this manual for free from our website and unlock the full potential of this remarkable product.

Share
Download
background image

The Meaning of LED Indicators

188 SnapServer Administrator Guide

SnapServer 500/600 Series Status and Drive Light Behavior

The server has two status lights, two network lights,  two lights for each of the four 

disk drives, and an identification light, as shown in the following illustration:

Overland Storage recommends that you become familiar with the operation of these 

lights.

Power, System, and LAN LEDs

These status lights are located to the right of the power button. Looking at the 

server from the front, the lights appear in the following order, from left to right: 

power LED, system LED, LAN 1 (Ethernet1) LED, and LAN 2 (Ethernet2) LED. The 

Disk Drive LEDs are below the status lights, and the indentification (Unit ID) LED 

is to the right of the LCD display.

System LED

Power LED

LAN LEDs

Unit ID (UID) LED

Disk Drive LEDs

Summary of Contents for 5325301507 - Snap Server 4400 NAS



























































































































































































































































Reviews:

No comments

Related manuals for 5325301507 - Snap Server 4400 NAS

D-Link NetDefend DFL-260E Reference Manual preview
NetDefend DFL-260E
Brand: D-Link Pages: 328
D-Link DFL-210 - NetDefend - Security Appliance Firewall Registration Manual preview
DFL-210 - NetDefend - Security Appliance
Brand: D-Link Pages: 19
Dahua N300 Quick Start Manual preview
N300
Brand: Dahua Pages: 12
D-Link NetDefend DFL-1600 Quick Manual preview
NetDefend DFL-1600
Brand: D-Link Pages: 23
D-Link DI-106 Series Faq preview
DI-106 Series
Brand: D-Link Pages: 29
D-Link DGS-3700 Series User Manual preview
DGS-3700 Series
Brand: D-Link Pages: 292
D-Link DGS-3224SR User Manual preview
DGS-3224SR
Brand: D-Link Pages: 140
D-Link DGS-1224T - Web Smart Switch User Manual preview
DGS-1224T - Web Smart Switch
Brand: D-Link Pages: 61
D-Link DI-LB604 - Load Balancing Router Quick Installation Manual preview
DI-LB604 - Load Balancing Router
Brand: D-Link Pages: 14
D-Link DIR-605L Specification preview
DIR-605L
Brand: D-Link Pages: 2
D-Link DIR-510L Manual preview
DIR-510L
Brand: D-Link Pages: 45
D-Link DES-3550 Manual preview
DES-3550
Brand: D-Link Pages: 218
D-Link DES-3528 - xStack Switch - Stackable User Manual preview
DES-3528 - xStack Switch - Stackable
Brand: D-Link Pages: 322
D-Link DIR-130 - Broadband VPN Router How To Set Up preview
DIR-130 - Broadband VPN Router
Brand: D-Link Pages: 10
D-Link DIR-130 - Broadband VPN Router Troubleshooting Manual preview
DIR-130 - Broadband VPN Router
Brand: D-Link Pages: 4
D-Link DIR-130 - Broadband VPN Router Configuration preview
DIR-130 - Broadband VPN Router
Brand: D-Link Pages: 13
D-Link DIR Series Configuration Manual preview
DIR Series
Brand: D-Link Pages: 13
D-Link DI-804HV - Express ENwork Router Configuration Manual preview
DI-804HV - Express ENwork Router
Brand: D-Link Pages: 19

Brands by name

Popular brands

Load more brands