background image

Configuring Share Access

Chapter 6  Share and File Access

105

Configuring Share Access  

The GuardianOS supports share-level as well as file- and directory-level 

permissions (see “Windows ACLs” on page 107) for all local and Windows domain 

users and groups. 

Share Access Behaviors

Administrators tasked with devising security policies for the SnapServer will find 

the following share access behaviors of interest:

• Share access defaults to full control — 

The default permission granted to users 

and groups when they are granted access to the share is full control. You may 

restrict selected users and groups to read-only access.

• User-based share access permissions are cumulative — 

An SMB, AFP, HTTP, or 

FTP user's effective permissions for a resource are the sum of the permissions 

that you assign to the individual user account and to all of the groups to which 

the user belongs in the Share Access page. For example, if a user has read-only 

permission to the share, but is also a member of a group that has been given full-

access permission to the share, the user gets full access to the share.

• NFS access permissions are not cumulative — 

an NFS user's access level is based 

on the permission in the NFS access list that most specifically applies. For 

example, if a user connects to a share over NFS from IP address 192.168.0.1, and 

the NFS access for the share gives read-write access to 

*

 (All NFS clients) and 

read-only access to 192.168.0.1, the user will get read-only access.

• Interaction between share-level and file-level access permissions — 

When both 

share-level and file-level permissions apply to a user action, the more restrictive 

of the two applies. Consider the following examples:

Example A: 

More restrictive file-level access trumps more permissive share-level 

access.

Share Level

File Level

Result

Full control

Read-only to FileA

Full control over all directories and files in 
SHARE1 

except

 where a more restrictive file-level 

permission applies. The user has read-only 
access to FileA.

Summary of Contents for 5325301507 - Snap Server 4400 NAS



























































































































































































































































Reviews: