Adaptec 5325301507 - Snap Server 4400 NAS, Administrator'S Manual

Page: 220 / 250

System Reset Options
204 SnapServer Administrator Guide
When the server finishes rebooting, the Login dialog box opens. Enter the default
admin password of
admin
, and click
OK
. The Initial Setup Wizard runs, allowing
you to reset the server name, admin password, and IP address.
•
Reset To Default ACLs For Volume
<
volume name
> Resets the file and directory
security on selected volumes. Volumes and snaptrees are all set to the Windows/
Mixed security model. All files and directories are set to the Windows personality
with a Windows ACL that gives full access to Administrators, read access to
Everyone, file/directory create access to Everyone (for directories), and full
access to the owner (owners are retained in the reset operation).
• You cannot initiate a reset to defaults if a Snaptree conversion is in progress.
• Rebooting or shutting down the server in the middle of an ACL reset will halt
the operation, and it will not recommence on reboot.
Performing System Resets Without Network Access
Should access to the server be lost, the Reset or LCD panel buttons can be used to
reset server settings and re-establish connectivity.
To Perform a Limited Reset Using the Reset Button
On SnapServer 4200 and 4500, the
Reset
button is a white button located to the left
of the black power button underneath the front bezel. On the SnapServer N2000, the
Reset button is located below the Power button on the server flange. On all other
SnapServers, the Reset button is accessed via a small hole next to the Power button
on the front of the server. Verify that the server is fully booted (as indicated by the
System LED blinking once per second), and push the
Reset
button. The system will
reboot after about a minute. As a part of the reset and reboot process, the
SnapServer does the following:
• Clears user-defined settings such as DHCP configuration
• Resets the server name to its default setting (
SNAP<server number>
)
• Resets network speed and bonding settings to their defaults
• Resets the Administrator password to the default (
admin
)
• Resets the web server to allow http