manualshive.com logo in svg

Adaptec 5325301507 - Snap Server 4400 NAS, Administrator'S Manual

Share
Download
Adaptec 5325301507 - Snap Server 4400 NAS Administrator'S Manual Download Page 164

Integrated Backup Solutions for the SnapServer

148 SnapServer Administrator Guide

Integrated Backup Solutions for the SnapServer

The following backup solutions are preinstalled and/or customized for the 

SnapServer:

BakBone Netvault

BakBone Netvault is a scalable, enterprise-wide backup solution for GuardianOS, 

Windows, Linux, and UNIX operating systems with the following functionality: 
•

Near-line storage

 — The SnapServer manages backup jobs, locally storing the 

backup images on disk using virtual tape library technology. Eight virtual drives 

with up to 100 GB capacity (total) are supported. (Additional capacity up to 

1.1 TB can be added with additional licenses.)

•

Direct-attached storage

 — Data from up to five clients is backed up to a 

standalone, SCSI-attached tape device attached to a SnapServer. Supports up to 

four tape drives.

Some SnapServers ship with BakBone’s NetVault server software preinstalled with 

a Workgroup Server license. This license supports backup and recovery of data to 

the SnapServer from up to 5 heterogeneous clients. (Additional clients can be added 

with optional licenses.) 

Note  

SnapServers 110, 210, and N2000 require an additional license to support 

NetVault.
For additional information on installing and configuring NetVault, see the 

documentation included with the NetVault CD that shipped with your SnapServer. 

To Enable NetVault for GuardianOS

To enable NetVault, click the 

Bakbone Netvault

 link on the SnapExtensions page, 

check the 

Enable

 box, and click 

OK

.

Adding Clients to the NetVault Management GUI

The 

Add Clients

 

button

 

allows you to specify the name or IP address of the 

workstation on which the NetVault management GUI has been installed.

1

Click 

Add Clients

 on the BakBone NetVault page.

2

Enter the management workstation’s DNS name or IP address.

3

Enter the NetVault client password created during installation for the client. The 

password field cannot be left blank.

4

Click 

Add

.

Summary of Contents for 5325301507 - Snap Server 4400 NAS



























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands