Adaptec 5325301507 - Snap Server 4400 NAS Administrator'S Manual Download

Page: 104 / 250

iSCSI Configuration on the SnapServer

SnapServer Administrator Guide

iSCSI Configuration on the SnapServer

iSCSI disks are created on the

Storage > iSCSI

screen of the Administration Tool.

Before setting up iSCSI disks on your SnapServer, carefully review the following

information.

Isolate iSCSI Disks from Other Resources for Backup Purposes

It is important to isolate iSCSI disks from other resources on the SnapServer for two

reasons:
• The file system of an iSCSI disk differs fundamentally from the SnapServer’s

native file system

• iSCSI disks are managed from client software rather than the SnapServer’s

Administration Tool

For ease of management and particularly for data integrity and backup purposes,

either dedicate the entire SnapServer to iSCSI disks, or if the server is to be used

with other shared resources, place the iSCSI disk and the other shared resources on

separate volumes.

• Back up an iSCSI Disk from the Client, not the SnapServer —

An iSCSI disk is not

accessible from a share and thus cannot be backed up from the SnapServer. The

disk can, however, be backed up from the client machine from which the iSCSI

disk is managed.

Note

While some third-party, agent-based backup packages could

technically

back up an iSCSI disk on the SnapServer, the result would be inconsistent or

corrupted backup data if any clients are connected during the operation. Only the

client can maintain the file system embedded on the iSCSI disk in the consistent

state that is required for data integrity.

• Do Not Use the GuardianOS Snapshots Feature on a Volume Containing an iSCSI

Disk —

Running a GuardianOS snapshot on a volume containing an iSCSI disk

will abruptly disconnect any clients attempting to write to the server’s iSCSI disk

and the resulting snapshot may contain inconsistent data. Supported Windows

servers can create a native snapshot of a SnapServer iSCSI disk using VSS (see

“Configuring VSS/VDS for iSCSI Disks” on page 93 for more information).

Summary of Contents for 5325301507 - Snap Server 4400 NAS



























































































































































































































































Search results

Summary of Contents for 5325301507 - Snap Server 4400 NAS

Reviews:

Related manuals for 5325301507 - Snap Server 4400 NAS

Brands by name

Popular brands

Adaptec 5325301507 - Snap Server 4400 NAS, Administrator'S Manual

Search results

Summary of Contents for 5325301507 - Snap Server 4400 NAS

Reviews:

Related manuals for 5325301507 - Snap Server 4400 NAS

Brands by name

Popular brands